Upgrade original 2011 2012 Toyota Avalon radio to dvd gps support 1080P HD Video Backup Camera

Many car owners of 2011 2012 Toyota Avalon choose to upgrade original 2011 2012 Toyota Avalon radio to dvd gps support 1080P HD Video Backup Camera with the help of technical man for they have no experience and also time.It can be a good choice if you have no interests in behaving it yourself.

There are also many people choose to do it themselves with the help of correct installation instructions.For it doesn’t need you to know much professional skills about the car,you can also achieve your object only if you can have asked special worker or get it through the Internet.

Though your car has no connection with the car in this article,you can also take this as reference.Instructions doesn’t apply to install all kinds of cars.However, if your car has different needs,please make the appropriate adjustments.If you have any questions about Toyota Avalon radio installation,please consult your car audio dealer.And before your work,you can have a look at following picture first:head unit after installation,aftermarket radio stereo dvd gps with sat nav system of 2011 2012 Toyota Avalon.

aftermarket radio stereo dvd gps with sat nav system of 2011 2012 Toyota Avalon

Pre-installation notes:

1.This new radio fits for the vehicle with 12V battery and negative end.Before installation,check the battery voltage

2.Before connecting,please make sure the ignition is off to avoid short circuit

3.Ensure connect the yellow and red power cable at last

4.Ensure that all loosened wires are isolated with electrical tape

5.Ensure not to tangle the wire when tighten the moving parts(such as seat rails)

6.Ensure that all GND is connected to the same place

7.Using the improper fuse may cause damage of fire,so when replace the fuse,please consult the professional person

2011 2012 Toyota Avalon original radio removal and new radio installation:

1.Original CD stereo

Original CD stereo

2.Make gear shift panel out

Make gear shift panel out

3.Make screws away as the picture show

Make screws away

4.Use a soft lever,remove the lid of the surface

Use a soft lever,remove the lid of the surface

5.Take two screws out as the image show

Take two screws out as the image show

6.Remove original car cd radio

Remove original car cd radio

7.Factory car radio after removal

Factory car radio after removal

Original head unit can be removed if you do as above steps show,and the following work is installation.

Please be very careful when you are making connections on cables,for you should make sure that you have correctly connected all wires.I suggest you to check it again if you are not very sure about it,to avoid stereo removal once again.Then you can install the new unit into the space.

Turn on installed new radio and see if the stereo can work,then install other parts that were removed before to places right for them.This is whole installation process for 2011 2012 Toyota Avalon new radio.

If you meet some problems that confused you,you can visit some websites to deal with,for example:http://www.seicane.com/8-inch-autoradio-dvd-car-audio-system-for-2011-2012-toyota-avalon-with-3d-gps-bluetooth-radio-rds-3g-wifi-tv-tuner-mp3-mp5-ipod-aux-hd-1080p-video-backup-camera-c270,where you can see more details about this stereo and you can also chat with the worker online,who can help you provide you some practical solutions.