What will you if you would like to enjoy more convenience and enjoyment in your beloved car? As far as I am concerned, it will be wise of you to remove your factory radio and install a new aftermarket car radio which comes with a lot of practical and entertainment features. The following is a 2008 2009 2010 2011 Toyota Auris car radio installation guide. If you own the same or similar dashboard, and plan to replace your factory radio, you can refer to this guide carefully.
2008 2009 2010 2011 Toyota Auris GPS Navi Car Stereo after installation
Tips about the installation:
1. Please disconnect the power before the installation.
2. Please prepare a lever and a screwdriver before the removal and the installation.
3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.
4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2008 2009 2010 2011 Toyota Auris car radio installation guide
1. The original car radio.
The original car radio
2. Use a flat plastic removal tool to remove the trims.
Use a flat plastic removal tool to remove the trims
2-1
3. Remove four bolts that are holding the car radio.
Remove four bolts that are holding the car radio
4. Remove the air vent panel and disconnect connectors behind it.
Remove the air vent panel and disconnect connectors behind it
5. Remove the original car radio frame.
Remove the original car radio frame
6. Remove the original car radio out from the dashboard.
Remove the original car radio out from the dashboard
7. Disconnect all connectors at the back of the original car radio.
8. Check all the accessories for the new Seicane car stereo.
9. Connect the harnesses to the back of the new Seicane car stereo.
10. Connect the Seicane car stereo to your original radio’s plugs.
11. Turn on the new Seicane car stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
12. Put the new Seicane car stereo into the dash.
13. Put everything into their original place. All the installation is done.
Wish the above installation guide can be helpful for you. Don’t worry if you come across any problems before or during the installation. To solve these problems you cannot deal with independently, you can consult your dealer, communicate with someone experienced or turn to a professional for help. Anyway, it is essential for you to select an ideal car radio for your beloved car. If you have no ideas, here I would like to share an amazing 2008 2009 2010 2011 Toyota Auris car radio from Seicane with you. For more details, please click:
This amazing car radio is loaded with the most advanced Android 8.0 operation system, a powerful eight-core Cortex A53 CPU processor and 32GB ROM as well as 4GB RAM, so this car radio will provide you with a smoother and faster operation experience.
Even though you are not familiar with the places you are driving around, the 3D GPS navigation system of high precision will help you a lot. Under the guidance of the turn-by-turn directions and voice prompts, you can easily locate where you are currently and find the right way to reach any locations you would like to go to. Besides, this unit comes with dual zone function, which enables you to listen to music, FM/AM radio while navigating.
Additionally, under the wireless Bluetooth technology, you can pair your Bluetooth-enabled mobile phone with this car radio so as to get access to Bluetooth hands-free phone calls as well as Bluetooth streaming music. Therefore, you can gain a lot of convenience and enjoyment.
Wish you like this unit and good luck to you!