Are you desired of having a chance to replace your factory radio with a new aftermarket car radio on your own. As a matter of fact, now it is time for you to do this if you find your original car radio is too old to be compatible with some modern features. And you should find a correct installation instruction to help you remove the factory radio and install the new car radio. The following 2014 2015 2016 Toyota Tundra car radio installation instruction from Seicane is for your reference.
2014 2015 2016 Toyota Tundra Bluetooth GPS DVD Car Radio after installation
Before and during installation, you should notice:
1. Before connecting, please make sure the ignition is off to avoid short circuit.
2. Ensure connect the yellow and red power cable at last.
3. Ensure that all loose wires are isolated with electrical tape
4. Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).
5. Ensure that all ground is connected to the same place.
6. Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.
7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400
2014 2015 2016 Toyota Tundra car radio installation instruction
1. The original car radio.
The original car radio
2. Pry the panel beneath the air conditioner controller with a lever, and then remove it.
Pry the panel beneath the air conditioner controller with a lever, and then remove it
3. Remove the air conditioner controller with your hands.
Remove the air conditioner controller with your hands
4. Unscrew the screws circled in red as follows which hold the original car radio in place with a screwdriver.
Unscrew the screws circled in red as follows which hold the original car radio in place with a screwdriver
5. Gently take the original car radio out of the dashboard.
Gently take the original car radio out of the dashboard
6. Disconnect the connectors at the back of the original car radio.
7. Check all the accessories for the new Seicane car radio.
8. Connect the harnesses to the back of the new Seicane car radio.
9. Connect the Seicane car radio to your original car radio’s plugs.
10. Turn on the new Seicane car radio to have a careful check if everything works well. If itdoesn’t, please check whether all the cables are connected correctly.
11. Put the new Seicane car radio into the dash.
12. Put everything into their original place.
Before the installation, please make clear every step. If you encounter any problems you cannot deal with by yourself, you can consult your dealer, communicate with someone experienced or turn to a professional for help. Besides, you can also arrange a professional technician to help you install the new car radio. Besides, it is essential for you to select an ideal car radio for your beloved car. If you have no ideas, you can check out the following link which is an amazing 2014 2015 2016 Toyota Tundra car radio from Seicane.
This intelligent car radio is specially designed for you to replace your factory radio in your 2014 2015 2016 Toyota Tundra. With the guidance of the turn-by-turn directions and voice prompt provided by the high-end 3D GPS navigation system, you can know your current locations and navigate to your desired destinations. And under the wireless Bluetooth technology, you can pair your Bluetooth-enabled mobile phone with this unit so as to dial, answer, reject and mute Bluetooth hands-free calls as well as listen to Bluetooth streaming music. Therefore, you can gain a lot of convenience and enjoyment.
If you like this unit, just don’t forget to add it to your shopping cart. Good luck!
precio del kamagra
https://buystromectolon.com/ – Stromectol