As you can see, an ideal car radio with better performance can provide you with much more convenience and entertainment. And if you are looking forward to a brand new driving experience, you can consider replacing your factory radio with a new multifunctional car radio. The following is a 2006 2007 2008 2009-2010 Toyota Terios car radio installation guide from Seicane, which may help you to some extent if you have the same car model.
2006 2007 2008 2009-2010 Toyota Terios Car Radio after installation
Before and during installation, you should notice:
1. Before connecting, please make sure the ignition is off to avoid short circuit.
2. Ensure connect the yellow and red power cable at last.
3. Ensure that all loose wires are isolated with electrical tape
4. Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).
5. Ensure that all ground is connected to the same place.
6. Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.
7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2006 2007 2008 2009-2010 Toyota Terios car radio installation guide
1. The original car radio.
The original car radio
2. Adjust the shifter lever.
Adjust the shifter lever
3. Use the plastic removal tool to remove the panel and unplug the connector behind.
Use the plastic removal tool to remove the panel and unplug the connector behind
3-1
4. Grab the center nob, remove it and use a screwdriver to unscrew the hidden screw.
Grab the center nob, remove it and use a screwdriver to unscrew the hidden screw
4-1
5. Remove the panel with a plastic removal tool, then unplug the connectors at the back of it.
Remove the panel with a plastic removal tool, then unplug the connectors at the back of it
5-1
5-2
6. Remove screws that are holding the radio.
Remove screws that are holding the radio
7. Release the clips and take out the original car radio.
Release the clips and take out the original car radio
7-1
8. Disconnect connectors and cables at the back of the radio.
Disconnect connectors and cables at the back of the radio
9. Check all the accessories for the new Seicane car stereo.
10. Connect the harnesses to the back of the new Seicane car stereo.
11. Connect the Seicane car stereo to your original stereo’s plugs.
12. Turn on the new Seicane car stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
13. Put the new Seicane car stereo into the dash.
14. Put everything into their original place. All the installation is done.
Wish the above installation steps can be helpful for you. To better finish the whole removal and installation process, if you encounter any problems, you can not only consult your dealer and someone experienced but also turn to a professional for help.
What’s more, it is very crucial for you to select an ideal car radio for your beloved car. If you have no ideas, you might as well check out the following link which is an amazing 2006 2007 2008 2009-2010 Toyota Terios car radio from Seicane.
Loaded with the stable and intelligent Android 7.1 operation system and a powerful quad-core 1.6GHz RK PX3 CPU processor, this car radio can be regarded as one of the best replacement for your factory radio.
With a seven inch digital touch screen with 1024*600 pixel resolution, this unit enables you to have a perfect view of the road ahead, which offers you a safe driving environment to some extent.
With the assistance of text-to-speech guidance provided by the high-accuracy 3D GPS navigation system,you are able to know your current locations and find the right way to reach your desired destinations. Besides, while navigating, you are able to freely listen to your favorite music, and the music can automatically switch to the GPS voice.
What are you waiting for? Just add it to your shopping cart right now. Good luck!