The Best Way to Upgrade a 2008 2009 2010 Jeep Commander GPS DVD Car Stereo with Bluetooth Navigation Function

First of all, please look at the following image. It is a 2008 2009 2010 Jeep Commander car stereo after installation. It looks very wonderful, doesn’t it? Here I would like to introduce that how a 2008 2009 2010 Jeep Commander car stereo installation is achieved. If you are interested in it or you also have a plan to replace your factory radio, you may read this article carefully. Perhaps you are able to learn something from it.

2008 2009 2010 Jeep Commander car radio after installation

2008 2009 2010 Jeep Commander car radio after installation

Before and during installation, you should notice:

1. Before connecting, please make sure the ignition is off to avoid short circuit.

2. Ensure connect the yellow and red power cable at last.

3. Ensure that all loose wires are isolated with electrical tape

4. Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5. Ensure that all ground is connected to the same place.

6. Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400

 

2008 2009 2010 Jeep Commander car stereo installation guide

1. The original car radio.

The original car radio

The original car radio

2. Remove the panel by prying the edges with a lever.

Remove the panel by prying the edges with a lever

Remove the panel by prying the edges with a lever

3. Unscrew four screws holding the original radio in place with a screwdriver.

Unscrew four screws holding the original radio in place with a screwdriver

Unscrew four screws holding the original radio in place with a screwdriver

4. Take the original radio out of the dash.

Take the original radio out of the dash

Take the original radio out of the dash

5. Disconnect the connectors at the back of the original radio.

Disconnect the connectors at the back of the original radio

Disconnect the connectors at the back of the original radio

6. Check all the accessories for the new Seicane car stereo.

Check all the accessories for the new Seicane car stereo

Check all the accessories for the new Seicane car stereo

7. Connect the harnesses to the back of the new Seicane car stereo.

Connect the harnesses to the back of the new Seicane car stereo

Connect the harnesses to the back of the new Seicane car stereo

8. Connect the Seicane car stereo to your original car radio’s plugs.

9. Turn on the new Seicane stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

10. Put the new Seicane stereo into the dash.

11. Put everything into their original place.

 

If you meet any problems, you can seek good advice from your dealer or someone experienced. Or you can directly go to a car radio upgrade center and ask a professional technician to help you install the new car radio. Anyway, before installation, it is very essential for you to carefully pick an ideal car radio. If you have no ideas, here I would like to share a marvelous 2008 2009 2010 Jeep Commander car radio from Seicane with you. For more details, please click:

https://www.seicane.com/android-radio-2008-2009-2010-jeep-commander-gps-navigation-bluetooth-usb-wifi-dvd-player-support-1080p-video-dvr-obd2-rearview-camera-steering-wheel-control-s6933g

This car radio is running on the latest and the most stable Android 8.0 operation system and a powerful eight-core CPU processor. Besides, this car radio also comes with a lot of practical and entertainment features, which enables you to enjoy great convenience and enjoyment.

Under the guidance of the turn-by-turn directions and voice prompts, you are able to easily know where you are currently and find the right way to reach your desired destinations. Additionally, this unit comes with dual zone function, so you can freely enjoy your favorite music while navigating.

What’s more, through the Bluetooth connection between your Bluetooth-enabled mobile phone and this unit, you can freely get access to Bluetooth hands-free phone calls as well as Bluetooth streaming music.

If you like this car radio, just add it to your shopping cart right now!

This entry was posted in Uncategorized and tagged . Bookmark the permalink.

One Response to The Best Way to Upgrade a 2008 2009 2010 Jeep Commander GPS DVD Car Stereo with Bluetooth Navigation Function

  1. Viagra says:

    homeopathie levitra

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>