Upgrading a high-end 2003 2004 2005 2006 Jeep Wrangler car stereo with exquisite design and practical capabilities in your vehicle can not only improve your in-car environment but also guide you to your desired destination with text-to-speech guidance with exhilaration, which can take your driving experience up a notch.
2003 2004 2005 2006 Jeep Wrangler car stereo after installation
As the above mentioned, to upgrade a car stereo sounds amazing. However, some car owners may worry about the complicated instruction would be a great trouble for them. As a matter of fact, the installation of a car stereo is quite easy. It can be a do-it-yourself job if you have some experience on it before. But if you don’t, you can also have it installed by a professional technician with the detailed guide. The following is the detailed guide to replace a 2003 2004 2005 2006 Jeep Wrangler car stereo for you as a reference.
Precautions before the installation:
- Please disconnect the negative cable of the battery for your safety.
- Please prepare a lever and a screwdriver before the installation.
The below is the step-by-step instruction on how to upgrade a 2003 2004 2005 2006 Jeep Wrangler car stereo.
- Remove the trim piece above cup holder with a lever.
2003 2004 2005 2006 Jeep Wrangler car stereo installation step 1
- Remove 2 screws behind the trim piece.
2003 2004 2005 2006 Jeep Wrangler car stereo installation step 2
- Gently pry around the side of trim panel with the lever and then remove the trim panel.
2003 2004 2005 2006 Jeep Wrangler car stereo installation step 3
- Remove 4 screws which holds the factory radio in place.
2003 2004 2005 2006 Jeep Wrangler car stereo installation step 4
- Take out the factory radio.
2003 2004 2005 2006 Jeep Wrangler car stereo installation step 5
- Disconnect the smaller harness on the behind of the factory radio.
2003 2004 2005 2006 Jeep Wrangler car stereo installation step 6
- Connect the cables of the new Seicane car stereo according to the guidance of the user manual.
- Connect the smaller harness at the back of the new radio.
- Put the new Seicane car stereo back into the dash.
- Install four screws and trim panel.
- Install 2 screws behind the trim piece and the trim piece.
- Turn on the new radio and have a comprehensive test.
Wish you can get help from the above instructions. Since the dashboards vary from year to year, the pictures of your car dashboard showed above may be a little different from yours, but the installation methods are similar. If you have any questions during the whole process, you can turn to your dealer for help.
To purchase a car stereo which can fit your car seamlessly is of great importance before your upgrade. If you are unsure which car stereo can fit your car, please click the following link which is about an amazing 2003 2004 2005 2006 Jeep Wrangler car stereo from Seicane.
Keeping your steering wheel control still work, this 2003 2004 2005 2006 Jeep Wrangler car stereo with bluetooth technology allows you to simply link with your enabled mobile phone for hands-free calling and streaming music. Supported DVD, Ipod, FM/AM radio, TV playback formats, you can play whatever you like to amuse both yourself and your passengers on a long journey. With the most accurate direction and spoken guidance provide by this car stereo, you can go anywhere you’d like when taking this 2003 2004 2005 2006 Jeep Wrangler car stereo with you on all your trips!