Do you want to go to a lot of locations without getting lost and with ease at the same time? If you say yes, then this article is worth your reading. To get the most accurate direction and a lot of entertainment on the way, you just need to upgrade your factory radio to a multifunctional car stereo which can offer much convenience in your car. The following is a 2004 2005 Dodge Neon head unit installation guide from Seicane to help with your installation.
2004 2005 Dodge Neon head unit after installation
Tips about the installation:
1.Please disconnect the power before the installation.
2.Please prepare a lever and a screwdriver before the removal and the installation.
3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.
2004 2005 Dodge Neon head unit installation guide
1.Remove the trim piece above cup holder with a lever.
1.Remove the trim piece above cup holder with a lever.
2.Remove 2 screws behind the trim piece.
2.Remove 2 screws behind the trim piece.
3.Gently pry around the side of trim panel with the lever and then remove the trim panel.
3.Gently pry around the side of trim panel with the lever and then remove the trim panel.
4.Remove 4 screws which holds the factory radio in place.
4.Remove 4 screws which holds the factory radio in place.
5.Take out the factory radio.
5.Take out the factory radio.
6.Disconnect the smaller harness on the behind of the factory radio.
6.Disconnect the smaller harness on the behind of the factory radio.
7.Connect the cables of the new Seicane head unit according to the guidance of the user manual.
7.Connect the cables of the new Seicane car stereo according to the guidance of the user manual.
8.Connect the smaller harness at the back of the new radio.
9.Put the new Seicane head unit back into the dash.
10.Install four screws and trim panel.
11.Install 2 screws behind the trim piece and the trim piece.
12.Turn on the new radio and have a comprehensive test.
The installation guide is quite easy to understand, isn’t it? However, if you don’t understand any step, you can consult your dealer or a professional. If you find your dashboard is different from that shown in the guide, please don’t worry, it won’t have much influence on the installation which is similar on the whole.
Before the installation, you need to make sure your new unit can fit your car, so that it can be installed perfectly in your car. If you don’t have one, then you can refer to this amazing 2004 2005 Dodge Neon head unit from Seicane, please click for more details:
This modern in dash Dodge Neon head unit comes with a WinCE 6.0 operation system and a digital 800*400 multi-touch screen for you to easily operate and view more clearly. Take this worldwide real-time built-in GPS navigation system with you, you can get the turn-by-turn direction and voice prompts to smoothly reach your destination. To keep safer and more pleasant, you just need to simply link with your enabled mobile phone to make and receive hands-free calls and stream music via the bluetooth technology. Just go and take it with you to have great fun.