Simple 11 steps to install a 2006 2007-2010 Toyota Camry Radio

First show you the picture of Seicane 2006-2010 Toyota Camry Radio after installation.

2006-2010 TOYOTA Camry Radio after installation

2006-2010 TOYOTA Camry Radio after installation

If you have the same dashboard with the picture shows, you can follow the instructions below.

Thesedays, Toyota Camry is more and more popular. And install a new radio on Toyota Camry is becoming a hot trend among us. Here are some professional instructions of Toyota Camry Radio installation. But if you didn’t install a radio before, you’d better do it with the help of a professional technician in case of some irreparable damage is being made.

 

Precautions before installation:

1.Before you begin any work, remember to disconnect negative power cable to avoid danger

2.Please turn off your car series include the radio unit and park your car well.

3.Before connecting, please make sure the ignition is off to avoid short circuit and connect the yellow and res cable at last.

 

2006-2010 Toyota Camry Radio installation

1)First remove two trim panels at each side of center console and set it aside.

2006-2010 TOYOTA Camry Radio installation step 1

2006-2010 TOYOTA Camry Radio installation step 1

2)Remove the top panel and set it aside.

2006-2010 TOYOTA Camry Radio installation step 2

2006-2010 TOYOTA Camry Radio installation step 2

3)Remove 4 screws holding the unit with a Phillips screwdriver.

2006-2010 TOYOTA Camry Radio installation step 3

2006-2010 TOYOTA Camry Radio installation step 3

4)Gently take out the panel on the radio interface.

2006-2010 TOYOTA Camry Radio installation step 4

2006-2010 TOYOTA Camry Radio installation step 4

5)Then take out the radio and disconnect cables at back of it.

2006-2010 TOYOTA Camry Radio installation step 5

2006-2010 TOYOTA Camry Radio installation step 5

6)Connect the cables on the new head unit as the user manual shows and place them well.

7)Put the new head unit into the dash.

8)Turn on the new head unit and have a comprehensive check if it works well.

9)Install 4 screws back to their original position.

10)Check whether the unit is working without problem.

11)If everything is OK, make trim panel back on your new Seicane radio.

 

By the way, you should make sure whether the aftermarket radio fits your car before installation, and here is a good aftermarket radio of Seicane which fits Toyota Camry well:

http://www.seicane.com/seicane-s126002-oem-android-4-4-4-gps-navigation-system-for-2006-2010-toyota-camry-with-bluetooth-radio-800-480-touch-screen-mirror-link-obd2-3g-wifi-steering-wheel-control-usb-sd-rearview-camera

This Seicane Toyota Camry Radio can be a good choice for you. It has intelligent pure android 4.4.4 operation system and 6.2 inch HD 800*480 multi-touch screen.

This in dash car DVD player features a useful and latest GPS system and the advanced bluetooth technology for easy wireless pairing with enabled devices to make or receive hands-free calls and enjoy streaming music. The ability of USB and an SD card slot are also provided for you for more portable devices to let you have an enjoyable experience while driving. The installation is quite easy and it is just plug and play. No wire needs to be modified or cut for the simple installation.

 

So, have a good trip with your new Toyota Camry Radio!

This entry was posted in Toyota car stereo and tagged . Bookmark the permalink.

One Response to Simple 11 steps to install a 2006 2007-2010 Toyota Camry Radio

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>