Would you like to install a multifunctional car radio in your car to replace your factory radio so as to enrich your in-car life? If you have such a plan and would like to finish the whole upgrade process on your own, you can find a related installation guide and follow it to deal with the installation. The following is a 2006 2007 2008 2009 2010-2013 Audi TT car radio installation guide from Seicane which can be taken as reference.
2006 2007 2008 2009 2010-2013 Audi TT GPS Bluetooth Car Radio after installation
Some tips before the installation:
1. Please disconnect the power before the installation.
2. Please prepare a lever and a screwdriver before the removal and the installation.
3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.
4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2006 2007 2008 2009 2010-2013 Audi TT car radio installation guide
1. The original car radio.
The original car radio
2. Prepare four removal keys.
Prepare four removal keys
3. There are four removal slots in the radio. Insert the removal keys into the holes of the radio.
There are four removal slots in the radio. Insert the removal keys into the holes of the radio
4. Pull outwards to release the radio.
Pull outwards to release the radio
5. Remove the removal keys in the radio.
6. Unplug connectors and cables at the back of the radio.
Unplug connectors and cables at the back of the radio
7. Check all the accessories for the new Seicane car radio.
Check all the accessories for the new Seicane car radio
8. Connect the harnesses to the back of the new Seicane car radio.
Connect the harnesses to the back of the new Seicane car radio
9. Connect the Seicane car radio to your original radio’s plugs.
10. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
11. Put the new Seicane car radio into the dash.
12. Put everything into their original place. All the installation is done.
Wish the above installation guide can be helpful for you. If you have any doubts, please feel free to contact your dealer, communicate with someone experienced or turn to a professional for help. For avoiding damage to either your car radio or your car, you can directly go to a car radio upgrade center and ask a professional technician to help you install the new car radio. Anyway, before installation, please do select an ideal car radio. If you have no ideas, here I would like to recommend an amazing 2006 2007 2008 2009 2010-2013 Audi TT car radio from Seicane to you. For more details, please click:
This car radio is loaded with the latest Android 7.1 operation system, a powerful quad-core CPU processor and 2GB RAM to enhance its capabilities and performance.
Even if y ou are not good at identifying directions, you can gain a lot of help from the advanced 3D GPS navigation system. With it, you can get access to a lot of features, mainly including current location, speed, mileage, landmark building display, 3D street view, destination search and turn-by-turn directions. Thanks to these features, you can have the best route option and gain the shortcut to reach your destinations. And this unit comes with dual zone function, which enables you to listen to your favorite music while navigating.
Additionally, by simply paring your Bluetooth-enabled mobile phone with this car radio, you can freely dial, answer, reject and mute hands-free phone calls as well as listen to Bluetooth streaming music, which can bring you both convenience and enjoyment.
Wish you like this unit and good luck to you!