With a factory radio which only comes with single function, you may easily get bored on a long trip. In that case, you can easily install a new head unit in your car to enjoy more advanced features. If you worry about the installation, please rest assured . It’s quite easy to install a new unit with a correct installation guide. If you have no experience, you can ask a professional for help. Now I’d like to introduce a step-by-step 2006-2010 TOYOTA Camry car stereo installation guide from Seicane for your reference.
2006-2010 TOYOTA Camry car stereo after installation
Tips about the installation:
1.Please disconnect the power before the installation.
2.Please prepare a lever and a screwdriver before the removal and the installation.
3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.
4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2006-2010 TOYOTA Camry car stereo installation guide
1.Remove two trim panels at each side of the center console and set it aside.
Remove two trim panels at each side of the center console and set it aside
2.Remove the top panel and set it aside.
Remove the top panel and set it aside
3.Remove 4 screws holding the unit with a Phillips screwdriver.
Remove 4 screws holding the unit with a Phillips screwdriver
4.Gently take out the panel on the radio interface.
Gently take out the panel on the radio interface
5.Take out the radio and disconnect cables at back of it.
Take out the radio and disconnect cables at back of it
6.Check all the accessories for the new Seicane car stereo.
Check all the accessories for the new Seicane car radio
7.Connect the harnesses to the back of the new Seicane car stereo.
Connect the harnesses to the back of the new Seicane car radio
8.Connect the Seicane car stereo to your original car radio ‘s plugs.
9.Put the new Seicane car stereo into the dash.
10.Turn on the new Seicane car stereo and have a comprehensive check if it works well.
11.Install 4 screws back to their original position.
12.Install the trim panel back to its original place.
Now are you able to install your new radio in you car under the guidance of this detailed installation guide specially for a 2006-2010 TOYOTA Camry car stereo? If not, don’t worry, you can ask a professional for help. If there is any question, you can consult your dealer.
if you don’t have an ideal radio for your car, I’d like to recommend this advanced TOYOTA Camry car stereo from Seicane to you. Here’s the link, please check out the following link for more details:
This in dash TOYOTA Camry car stereo is able to operate as an entertainment device, a GPS navigation system and a Bluetooth hands-free and streaming music receiver, so you can not only have the accurate guidance of different routes but also can enjoy the fun and relaxation the multimedia provides for you all the way. To have more fun on the way, it’s just your best choice. Good luck to you!