If you are the one who wants to install a dvd player for your Kia Ceed,then you may need some professional technicians about installation.What’s more,please do not disassemble the host privately to avoid damage and accident.Today I will tell you installation guide for 2010 Kia Ceed bluetooth dvd with aftermarket sat nav system.
While you are upgrading your car radio,the wire arrangement must be reasonable.Normally,the space for installation is limited.You’d better reduce unnecessary wirings to make the dvd player easier to install and function.The cables and wires to the car radio head unit must be routed properly to avoid touching any moving parts,such as steering wheel column acceleration pedal and brake pedal.all the cables must be bonded properly to against any loose during driving.
Before you begin your job,you can turn on the engine to check dashboard function display and button operation system whether is normal;whether inside and outside surface of car have squandering phenomenon.Then the installer can reflect to customers what problems you have.
One car DVD player will bring you much entertainment exactly ,the following part are specific removal and upgrade steps:
1.Prize the below part of trim panel with a lever, you may need one like this,and the same to other side
a lever like this is needed
prize the below part of trim panel with a lever
2.Then you will pry overhead part of dashboard
pry overhead part of dashboard
3.With four sides all fastened,you can easily move dashboard(be careful it can just move,not remove)
easily move dashboard
4.Before you can remove it,you should disconnect all cables between them
disconnect all cables between them
5.After that you only can remove the dashboard totally
remove the dashboard totally
6.Remove four screws with a screwdriver
remove this screw and one beaside it
remove higher screw and the one beside it
7.Gently take out the original car radio and unplug all cables connected it
gently take out the original car radio
8.You may have a small rest here because you have finished very important part of it.After removal,plug the new player to cables in the car
9.Firm four screws which are put aside and installation series are over after you mount dashboard on your new unit
Here’s an image for new unit after installation,bluetooth dvd with gps nav system of 2010 Kia Ceed:
new unit after installation,bluetooth dvd with gps nav system of 2010 Kia Ceed
All steps of car radio’s installtion has been introduced, if you want to try by yourself, you can start your Kia Ceed bluetooth dvd installation if you are sure that it will be safe and you have grasped it well.
With more convenient functions in your car, driving can be an interesting thing especially when you are on a trip with your family or friends.That’s an enviable thing, isn’t?But wherever you go, remember safety must be the most pivotal.
I advice that you’d better make sufficient preparations such as read installtion guidance carefully or search for useful information by scanning related websites,for example:http://www.seicane.com/double-din-2010-kia-ceed-hd-touch-screen-gps-navigation-system-auto-av-in-out-am-fm-radio-bluetooth-dvd-player-mp3-3g-wifi-tv-ipod-iphone-aux-pop-backup-camera-c086.You can also ask the workers of the market for help.Wish you good luck!