Installation guide for 2008-2013 Audi Q5 bluetooth gps radio

If you are the one who wants to replace your original CD player of the car with a dvd player,you’d better search for professional installation guide for 2008-2013 Audi Q5 bluetooth gps radio if you are a owner of this series car.

Before installation,you can start the engine and check whether the dashboard function and button operation work well,whether the car inside and outside surface has a squandering phenomenon.In addition,please do not disassemble the host privately to avoid damage and accident.

Now I will tell you how to install 2008-2013 Audi Q5 bluetooth gps radio.When installing, the wire arrangement must be reasonable,because the space for it is limited.These are the detailed steps of Audi Q5 car CD player removal.

1.The original dashboard

the original dashboard

2.Release and remove the original screen frame

release and remove the original screen frame

3.Pull out the double flashing light button

pull out the double flashing light button

4.Take out the four screws which fixed the screen

take out the four screws which fixed the screen

5.Remove the cable on the screen

remove the cable on the screen

6.Release and get out the air-conditioner vent grille

release and get out the air-conditioner vent grille

7.Release and pull out the air-conditioner controller

release and pull out the air-conditioner controller

8.Take out four screws which fixed the original CD player and remove the player

take out four screws which fixed the original CD player and remove the player

9.Make the cable connected as the picture show

make the cable connected as the picture show

10.Make the cable connected with the GPS box

make the cable connected with the GPS box

11.Fix the GPS box on the glove box by using the support

fix the GPS box on the glove box by using the support

12.Connect the cable to the screen

connect the cable to the screen

13.Make the original power line connected to the tieline

make the original power line connected to the tieline

14.Connect the tieline to the original car

connect the tieline to the original car

15.Firm the screws which was removed from the original CD player

firm the screws which was removed from the original CD player

16.Start up and check out all the functions,then install other part to their original place

start up and check out all the functions,then install other part to their original place

17.New dashboard after installation,bluetooth gps radio of 2008-2013 Audi Q5

new dashboard after installation,bluetooth gps radio of 2008-2013 Audi Q5

When all the 17 steps are finished ,you can check out the installation process and make sure whether your Audi Q5 bluetooth has reversed or not.Then test navigation card and navigation antenna in order to make sure whether it has been connected correctly or not.

In addition, it should be able to search and locate GPS. After that you can check the radio signal and see the radio antenna works or not.Confirming bluetooth function and linking to bluetooth are also necessary work after installation.Obviously you will obtain a great journey after installing the new car radio of Audi Q5.