How to upgrade a 2008-2013 VW Volkswagen Scirocco car stereo with Bluetooth Quad-core CPU 16G Flash 3G WiFi Mirror Link OBD2

To keep yourself and your passengers entertained on the way, there are a lot of ways for you to choose from. One of the easiest ways is to replace your factory radio with a brand new aftermarket head unit which can support quite lot entertainment features to have fun. And the installation of a new head unit is not too difficult. Here I’d like to share a professional 2008-2013 VW Volkswagen Scirocco car stereo installation instruction from Seicane with you for your reference.

2008-2013 VW Volkswagen Scirocco car stereo after installation

2008-2013 VW Volkswagen Scirocco car stereo after installation

Before and during installation, you should notice:

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2008-2013 VW Volkswagen Scirocco car stereo installation guide

1.Remove the top panel with a lever.

Remove the top panel with a lever

Remove the top panel with a lever

2.Disconnect the connector at the back of the panel.

Disconnect the connector at the back of the panel

Disconnect the connector at the back of the panel

3.Unscrew the screw with a screwdriver.

Unscrew the screw with a screwdriver

Unscrew the screw with a screwdriver

4.Remove the metal sheet on the top with your hands.

Remove the metal sheet on the top with your hands

Remove the metal sheet on the top with your hands

5.Unscrew two screws circled in red shown as follows under the metal sheet.

Unscrew two screws circled in red shown as follows under the metal sheet

Unscrew two screws circled in red shown as follows under the metal sheet

6.Remove the air conditioner vent with your hands.

Remove the air conditioner vent with your hands

Remove the air conditioner vent with your hands

7.Unscrew two screws under the vent with a screwdriver.

Unscrew two screws under the vent with a screwdriver

Unscrew two screws under the vent with a screwdriver

8.Remove the panel on the original car radio.

Remove the panel on the original car radio

Remove the panel on the original car radio

9.Unscrew four screws holding the original car radio with a screwdriver.

Unscrew four screws holding the original car radio with a screwdriver

Unscrew four screws holding the original car radio with a screwdriver

10.Take the original car radio out of the dash.

Take the original car radio out of the dash

Take the original car radio out of the dash

11.Disconnect all the connectors at the back of the original car radio.

Disconnect all the connectors at the back of the original car radio

Disconnect all the connectors at the back of the original car radio

12.Check all the accessories for the new Seicane car stereo.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

13.Connect the harnesses to the back of the new Seicane car stereo.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

14.Connect the Seicane car stereo to your original car radio ‘s plugs.

15.Turn on the new Seicane car stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

16.Put the new Seicane car stereo into the dash.

17.Put everything into their original place.

Is it easy for you to understand all the steps for the 2008-2013 VW Volkswagen Scirocco car stereo? If not, you can consult your dealer. If it’s the first time for you to install a new car stereo in your car, it’s strongly suggested you ask a professional for help. But if you haven’t found an ideal stereo for your car, you can take the following popular 2008-2013 VW Volkswagen Scirocco car stereo from Seicane as a reference, please click:

http://www.seicane.com/seicane-s128405-8-inch-android-dvd-radio-car-navigation-head-unit-for-2008-2013-vw-volkswagen-scirocco-with-3g-wifi-mirror-link-obd2-bluetooth

This in-dash VW Volkswagen Scirocco car stereo features a built-in GPS with lifetime traffic updates to provide turn-by-turn guidance for a variety of locations. The large 8 inch inch HD touch screen simplifies the operation and makes it easy to enjoy your media.

It integrates your compatible mobile phone seamlessly into your car stereo to put content at your fingertips, which creates a safe driving experience. It also enables you to get access to your music library, messages and more via this wonderful car stereo. To add more fun on your way, this multifunctional VW Volkswagen Scirocco car stereo is just your great choice!

This entry was posted in Uncategorized. Bookmark the permalink.

3 Responses to How to upgrade a 2008-2013 VW Volkswagen Scirocco car stereo with Bluetooth Quad-core CPU 16G Flash 3G WiFi Mirror Link OBD2

  1. bonalqiawo says:

    Muchas gracias. ?Como puedo iniciar sesion?

    • kubo says:

      dear, this is our website.
      https://www.seicane.com/
      Could you please send us the photo of your car’s dashboard to sales@seicane.com?  
      And could you please tell us the model and year of your car?
      Then we can help you check if we have unit can fit your car or not ,hope you could cooperate with us.
      Looking forward to hearing from you soon.
      Thank you & Best regards!

  2. kubo says:

    dear,
    here is our website,you can buy directly:
    https://www.seicane.com/

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>