To make the car life more convenient, car owners are trying more and more ways. Replacing the factory radio with a new aftermarket head unit is one of the most popular ways. Because a new aftermarket not only can bring both convenience and enjoyment but also is easy to install. If you have some related experience and a correct installation guide, you can easily finish the installation on your own. Please look at the image below, it’s a 2007-2010 NISSAN QASHQAI head unit from Seicane after installation. If you have the same or similar dashboard, you can refer to the following 2007-2010 NISSAN QASHQAI head unit installation guide.
- Please apply the parking brake before the installation.
- For your safety, please disconnect the negative cable on the vehicle battery.
- Please prepare a lever and a screwdriver for the installation.
2007-2010 NISSAN QASHQAI head unit installation guide
Use a screwdriver to remove two screws above the Nissan Frontier radio.
Step 2: Remove the trim panel.
Please wedge a flat tip screwdriver under the trim panel and pry up on it to remove the trim panel. To protect the trim from being accidentally scratched, you can use a clean rag while prying up on the trim panel.
Step 3: Unscrew the four screws which are holding the factory radio in place with a screwdriver. Then gently take the factory radio off the panel.
Step 4: Disconnect the radio antenna in the back of the factory radio and unplug the electrical plugs running to the back of the radio.
Step 5: Connect the antenna in the back of the new Seicane head unit and plug the electrical plugs running to the back of the radio. If you have any question on how to connect the antenna to new head unit, please take the user manual as a reference or turn to the dealer for a wiring diagram.
Step 6: Turn on the new Seicane head unit to have a careful check if it works well with your car. If it doesn’t, please check whether all the cables are connected correctly.
Step 7: After the test, please put the new Seicane head unit into the dash.
Step 8: Install all the screws and the trim panel into their original place.
That’s the detailed installation instructions for a 2007-2010 NISSAN QASHQAI head unit. If you find you have a different dashboard with the one shown in the pictures above, please don’t worry, it’s normal that cars in different models and manufacture years come with different dashboards. But the installation is similar. If you have any questions, you can turn to your dealer or a professional for help.
Before you start to install a head unit, you need to confirm you have a right 2007-2010 NISSAN QASHQAI head unit for your car. If not, an incorrect head unit won’t work well in your car. Here’s an amazing 2007-2010 NISSAN QASHQAI head unit from Seicane for you as a reference.
This NISSAN QASHQAI head unit comes with a latest GPS navigation system with world-wide real time guidance to let you get to a wide range of locations. You can amuse yourself and your passengers by connecting your Bluetooth-enabled mobile phone with this unit to stream music, besides, a safe journey is available for you in this way. A backup camera can be connected with this unit for help you park easily.
Just reach a wide range of location with great pleasure and relaxation all the way with this NISSAN QASHQAI head unit in your car. Good luck to you!