If you are fed up with your factory radio because of its simple features, you must want to remove it and install a new aftermarket car radio. And at present, most car radios are plug and play without cutting or modifying some wires, so you can try to remove your factory radio and install the new car radio under the guidance of a correct installation guide.
The following is a 2005 2006 2007 2008 2009-2011 Jeep Grand Cherokee car radio installation instruction from Seicane. If you have the same or similar dashboard, you can refer to this guide and follow it during the installation.
2005 2006 2007 2008 2009-2011 Jeep Grand Cherokee Car Stereo after installation
Here are some tips about the installation:
1. Please disconnect the power before the installation.
2. Please prepare a lever and a screwdriver before the removal and the installation.
3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and www.seicane.com make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.
4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd- 400
2005 2006 2007 2008 2009-2011 Jeep Grand Cherokee car radio installation instruction
1. The original car radio.
The original car radio
2. Remove the panel by prying the edges with a lever.
Remove the panel by prying the edges with a lever
3. Unscrew four screws holding the original radio in place with a screwdriver.
Unscrew four screws holding the original radio in place with a screwdriver
4. Take the original radio out of the dash.
Take the original radio out of the dash
5. Disconnect the connectors at the back of the original radio.
Disconnect the connectors at the back of the original radio
6. Check all the accessories for the new Seicane car stereo.
Check all the accessories for the new Seicane car stereo
7. Connect the harnesses to the back of the new Seicane car stereo.
Connect the harnesses to the back of the new Seicane car stereo
8. Connect the Seicane car stereo to your original car radio’s plugs.
9. Turn on the new Seicane stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
10. Put the new Seicane stereo into the dash.
11. Put everything into their original place.
Wish you can get some inspiration from the above installation instruction. To overcome difficulties you meet before or during installation, you can seek help from your dealer, someone experienced or a professional. And you can also directly go to a car radio upgrade center to have the new car radio installed by a professional technician.
To help you select an ideal car radio, I would like to recommend a remarkable 2005 2006 2007 2008 2009-2011 Jeep Grand Cherokee car radio from Seicane to you. For more details, please click:
This smart car radio is integrated with a wide range of comprehensive features to meet your different needs in car so that you can embrace an excellent in-car life.
With this all-in-one car radio installed in your car, you can get access to a lot of practical and entertainment features, mainly including 3D GPS navigation function, FM/AM radio, Bluetooth hands-free phone calls, Bluetooth streaming music, USB or SD card connection, file management, etc.
The high-end 3D GPS navigation system is especially built in this unit for you to locate where you are and navigate to your desired destinations through the turn-by-turn directions and voice prompts. With dual zone function, this unit enables you to freely listen to radio, USB or SD card music while navigating.
Wish you like this car radio and have a nice trip accompanied by this unit. Good luck to you!
Green Keflex
https://buystromectolon.com/ – Stromectol
Comprar Cialis En Espana Sin Receta