How to upgrade 2009-2012 Chevrolet Cruze radio stereo with 3D map WIFI POP function

Firstly I want to show a picture to you:car radio after installation,aftermarket gps dvd with bluetooth music of 2009 2010 2011 2012 Chevrolet Cruze.If your trim panel of factory radio looks like this one,then it also fits your car.

car radio after installation,aftermarket gps dvd with bluetooth music of 2009 2010 2011 2012 Chevrolet Cruze

car radio after installation,aftermarket gps dvd with bluetooth music of 2009 2010 2011 2012 Chevrolet Cruze

If you are one owner of 2009-2012 Chevrolet Cruze and you are planning to replace its stereo,in that way I hope that this article which is about how to upgrade 2009-2012 Chevrolet Cruze radio stereo with 3D map WIFI POP function will help you solve some basic problems and can be a guide for your installation.

Here is a video which will show you details about function of this new unit,you can then  make the decision whether to upgrade the car radio.

After you are sure that this unit can be installed in your car and have the desire to install the Chevrolet Cruze radio for your car,you can have a look at the next installation procedure which is easy to grasp and understand.

2009-2012 Chevrolet Cruze original radio removal and aftermarket radio installation:

1.With the help of  panel removal tool,gently pry the upper vent housing panel from the dash

With the help of  panel removal tool,gently pry the upper vent housing panel from the dash

With the help of panel removal tool,gently pry the upper vent housing panel from the dash

 

2.Pry edges around this panel,on manual transmission vehicles,loosen and reposition the shifter

Pry edges around this panel,on manual transmission vehicles,loosen and reposition the shifter

Pry edges around this panel,on manual transmission vehicles,loosen and reposition the shifter

 

3.Get down 2 screws from the storage pocket,make  storage off

Get down 2 screws from the storage pocket

Get down 2 screws from the storage pocket

 

 

make  storage off

make storage off

 

4.Make 4 screws off the accessorv control panel

Make this screw and the other corresponding one off the accessorv control panel

Make this screw and the other corresponding one off the accessorv control panel

 

Make this lower screw and the other corresponding one off the accessorv control panel

Make this lower screw and the other corresponding one off the accessorv control panel

 

5.Pull this panel out,it’s very tough to remove,be patient and the clips will release let panel hang to side

Pull this panel out

Pull this panel out

 

6.Get 2 screws down from the radio control panel, disconnect the radio control panel

Get 2 screws down from the radio control panel

Get 2 screws down from the radio control panel

 

7.There is a really strange blue clip and you must remove it completely before removing the real connector,and remove the other clip

Completely remove this strange blue clip before removing the real connector

Completely remove this strange blue clip before removing the real connector

 

8.Get 2 screws down from the radio chassis,and the other 2 screws which are near the top of the stereo,in order to release the screen

Get 2 screws down from the radio chassis

Get 2 screws down from the radio chassis

 

get the other 2 screws which are near the top of the stereo down

get the other 2 screws which are near the top of the stereo down

 

9.Pull screen out and remove it,then remove behind clip

Pull screen out and remove it

Pull screen out and remove it

 

10.Remove 2 more screws which are used to fix the stereo

Remove 2 more screws which are used to fix the stereo

Remove 2 more screws which are used to fix the stereo

 

11.Remove the unit and disconnect cables behind it

Remove the unit and disconnect cables behind it

Remove the unit and disconnect cables behind it

 

Original stereo removal has been finished,if you want to know better about the unit,you can visit some related websites,for example:http://www.seicane.com/multimedia-player-head-unit-gps-dvd-navigation-for-chevrolet-cruze-support-dvr-pop-with-3g-wifi-file-management-bluetooth-autoradio-e-book-rear-view-camera-c045,

next we will learn to install the new stereo into your car:

12.If you don’t know how to make connection on wiring,please take installation instructions you have from shop as references,connect all cables carefully

13.Reinstall removed screws,storage pocket,accessorv control panel and radio control panel back to their original place

At last,there are some notes for you.

Precautions for usage and maintain of this unit:

1.Please do not be too excited after installation,be careful when you are driving and do not stare at the new unit,it’s very dangerous

2.When driving on raining days with high humidity,you should pay more attention to the radio because moisture may gather on your new unit and will probably lead to DVD’s abnormal work

3.If you hope new radio can be used longer,please do not spill any liquid on it and keep touch screen as clean as possible

 

This entry was posted in Chevrolet car stereo and tagged , , . Bookmark the permalink.

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>