Have you ever tried to install a new car radio on your own before? If not, you may think it too hard for you to do it by yourself. As a matter of fact, it is not too difficult since most of car radios are just plug and play with special wiring harness. If you have a 2003 2004 2005 2006 2007 Toyota Corolla E120 BYD F3 and also plan to replace your factory radio with a new aftermarket car radio, you can find a related installation guide to help you with the installation. The following is a 2003 2004 2005 2006 2007 Toyota Corolla E120 BYD F3 car radio installation guide from Seicane which can be taken as your reference.
2003 2004 2005 2006 2007 Toyota Corolla E120 BYD F3 GPS Bluetooth after installation
Before and during installation, you should notice:
1. Before connecting, please make sure the ignition is off to avoid short circuit.
2. Ensure connect the yellow and red power cable at last.
3. Ensure that all loose wires are isolated with electrical tape
4. Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).
5. Ensure that all ground is connected to the same place.
6. Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.
7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2003 2004 2005 2006 2007 Toyota Corolla E120 BYD F3 car radio installation guide
1. The original car radio.
The original car radio
2. Adjust the shifter lever.
Adjust the shifter lever
3. Use the plastic removal tool to remove the panel and unplug the connector behind.
Use the plastic removal tool to remove the panel and unplug the connector behind
4. Grab the center nob, remove it and use a screwdriver to unscrew the hidden screw.
Grab the center nob, remove it and use a screwdriver to unscrew the hidden screw
5. Remove the panel with a plastic removal tool, then unplug the connectors at the back of it.
Remove the panel with a plastic removal tool, then unplug the connectors at the back of it
6. Remove screws that are holding the radio.
Remove screws that are holding the radio
7. Release the clips and take out the original car radio.
Release the clips and take out the original car radio
8. Disconnect connectors and cables at the back of the radio.
Disconnect connectors and cables at the back of the radio
9. Check all the accessories for the new Seicane car radio.
Check all the accessories for the new Seicane car radio
10. Connect the harnesses to the back of the new Seicane car radio.
Connect the harnesses to the back of the new Seicane car radio
11. Connect the Seicane car radio to your original radio’s plugs.
12. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
13. Put the new Seicane car radio into the dash.
14. Put everything into their original place. All the installation is done.
Wish the above installation guide can be helpful for your car radio installation process. If you have any doubts about your new car radio or the installation, you can browse some professional websites. Or you can seek help from your dealer, someone experienced or a professional. If you still think the installation process is too complicated for you, you can directly go to a car radio upgrade center to arrange a technician to help you install the new car radio.
While as for the selection of an ideal car radio, if you don’t have any ideas, I’d like to recommend an amazing 2003 2004 2005 2006 2007 Toyota Corolla E120 BYD F3 car radio from Seicane to you. For more details, please click:
The operation system of this car radio has been upgraded to the most advanced and stable Android 7.1.1 version, and this car radio is loaded with a strong quad-core CPU processor. Therefore, with this car radio installed in your car, you are able to enjoy a much smoother, faster and easier operation experience than ever before.
With the assistance of the built-in 3D GPS navigation system, you can easily and quickly know your current locations and accurately gain the most suitable route option to arrive at your desired destinations according to turn-by-turn directions and voice prompts. And thanks to this car radio’s dual zone function, you are able to listen to your favorite music while navigating, and the music will automatically switch to GPS voice.
What’s more, by simply connecting your Bluetooth-enabled mobile phone with this car radio through the wireless Bluetooth module, Bluetooth hands-free calls and Bluetooth streaming music are both available for you to own a driving full of safety, convenience and joyfulness.
What are you waiting for? If you like this car radio, just add it to your shopping cart. Good luck to you!
https://buystromectolon.com/ – Stromectol