Here comes an attractive Mercedes SL R230 SL350 SL500 SL55 SL600 SL65 car radio from Seicane after installation. Some car owners may want to know if it is quite complicated to install such a car stereo. As a matter of fact, most of the stereos nowadays are just plug and play, so it’s quite easy to install. If you are tired of the single function of your factory radio, it’s wise of you to upgrade it with a new aftermarket one.
Please look at the picture below, if you also have the same dashboard, then you can read this Mercedes SL R230 SL350 SL500 SL55 SL600 SL65 car radio installation guide carefully to help with the installation.
Before and during installation, you should notice:
1.Before connecting, please make sure the ignition is off to avoid short circuit.
2.Ensure connect the yellow and red power cable at last.
3.Ensure that all loose wires are isolated with electrical tape
4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).
5.Ensure that all ground is connected to the same place.
6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.
7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
Mercedes SL R230 SL350 SL500 SL55 SL600 SL65 car radio installation steps
1. Remove two side panels with a lever as the picture shows.
2. Pop out the part shown as the red circle below, then take out the cover as the middle picture shows below. After that, push the part back.
3. Unscrew all the screws along both side panels with a screwdriver.
4. Use a lever to release the plastic panel, then remove it as the picture shows.
5. Remove two screws circled in the picture below with a screwdriver.
6. Take out the part shown as the picture.
7. Gently take the original car radio out of the dash.
8. Disconnect all connectors at the back of the original car radio.
9. Check all the accessories for the new Seicane car radio.
10. Connect the harnesses to the back of the new Seicane car radio.
11. Connect the Seicane car radio to your original car radio ‘s plugs.
12. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
13.Put the new Seicane car radio into the dash.
14. Put everything into their original place. All the installation is done.
Above all, you need to make clear about every step before you start to install this Mercedes SL R230 SL350 SL500 SL55 SL600 SL65 car radio in your car. If there is any question, you can seek help from your dealer. If you don’t have any experience on the installation, it’s strongly suggested you ask a professional to install your new unit. If you are still looking for a suitable head unit for your car, I’d like to recommend an intelligent Mercedes SL R230 SL350 SL500 SL55 SL600 SL65 car radio from Seicane to you. Please click for more details:
With this Mercedes SL R230 SL350 SL500 SL55 SL600 SL65 car radio in your car, its real-time GPS navigation system can provide the current location, 3D street view, landmark display, millions of points of interests, route-planning, turn-by-turn direction and voice prompts, you can easily get to your destination on time. The dual-zone function enables you to listen to your favorite music when the GPS navigation system is working. Just have a great time with this powerful Mercedes SL R230 SL350 SL500 SL55 SL600 SL65 car radio from now on!