As replacing the factory radio with a new car stereo has become a trend, most car owners choose to upgrade their factory radio to enjoy more convenience in their car. However, some car owners worry about the installation is too complicated, so they don’t have any further move except the good idea. In fact, the installation of a new car stereo is quite simple, you can even achieve it if you have the correct installation guide and some related installation experience. Please look at the picture below, it’s the a modern Seicane Chery A3 A5 Tiggo car stereo. If you have the same or similar dashboard, you can take the following installation guide as a reference.
Chery A3 A5 Tiggo car stereo after installation
Here are some tips about the installation:
1.Please disconnect the power before the installation.
2.Please prepare a lever and a screwdriver before the removal and the installation.
3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.
Chery A3 A5 Tiggo car stereo installation guide
1·Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside.
Chery A3 A5 Tiggo car stereo installation step 1
2·Remove screws that fixed the radio on the dashboard.
Chery A3 A5 Tiggo car stereo installation step 2
3·Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio.
Chery A3 A5 Tiggo car stereo installation step 3
4·Unplug the connectors at the back of the factory radio.
Chery A3 A5 Tiggo car stereo installation step 4
- Make antennas and cables connected step by step as installation instructions show, and you should be very careful when you are doing this for it will affect whole procedure.
Chery A3 A5 Tiggo car stereo installation step 5
- Put the new Seicane car stereo into your car, you should check whether your connections are correct, and you’d better have a tidy for the cables.
7· If everything is OK, firm screws into their original place.
Chery A3 A5 Tiggo car stereo installation step 7
8·Firm the panel on the new Seicane car stereo. Finally the new Seicane car stereo is installed and a comprehensive test should be conducted on the new radio.
Chery A3 A5 Tiggo car stereo installation step 8
The above is the step-by-step installation instructions to install a Chery A3 A5 Tiggo car stereo. If you want to get more detailed help, you can ask your dealer for a wiring diagram. If you encounter any questions during the whole process of the installation, it’s suggested you consult your dealer or a professional for help.
Before the installation, it’s also vital for you to confirm you have a right car stereo which can perfectly fit your car and can be installed in your car seamlessly. If you are still looking for one, you can refer to the following link which is about a great Seicane Chery A3 A5 Tiggo car stereo.
Specially made for Chery A3 A5 Tiggo, this amazing car stereo is built with a real-time 3D GPS system, you can get the accurate direction and spoken guidance to arrive at your destination on time. To sync your mobile phone with this unit, you are able to dial and receive phone calls without taking your hands from the steering wheel control for security as well as stream from music for fun. The availability of USB/iPod connection allows you to have more flexible options to keep relaxed all the way.
Just enjoy your brand new driving experience with this great Chery A3 A5 Tiggo car stereo from now on and have a great time! Good luck to you!
https://buystromectolon.com/ – Stromectol