The idea that it’s complicated to install a car stereo replacement might make quite a few car owners stop from upgrading an aftermarket head unit. As a matter of fact, the installation is quite easy that car owners can install it by themselves. However, if it’s your first time to install a 2013 2014 2015 DODGE RAM 1500 car stereo, you’d better turn to a professional for help. Considering that incorrect may cause irreparable damage to both your car and the new head unit.
2013 2014 2015 DODGE RAM 1500 2500 3500 4500 car stereo after installation
The below is the detailed instruction on how to install a 2013 2014 2015 DODGE RAM 1500 car stereo, if you are going to install a new head unit, it’s strongly suggested that you have a careful reading and a good understanding before you begin.
Precautions:
- Please disconnect the negative cable on the vehicle battery to ensure security.
- Please prepare a lever and a screwdriver before the installation.
The following is the step-by-step guide on the installation of a 2013 2014 2015 DODGE RAM 1500 car stereo:
- Pry the cover at the top of the trim panel with a lever and remove it.
2013 2014 2015 DODGE RAM 1500 2500 3500 4500 car stereo installation step 1
- Remove two screws which hold the trim panel with a screwdriver.
2013 2014 2015 DODGE RAM 1500 2500 3500 4500 car stereo installation step 2
- Gently pry the outer edges of the trim panel with hands and remove it from the dashboard.
2013 2014 2015 DODGE RAM 1500 2500 3500 4500 car stereo installation step 3
- Disconnect the air conditioning control switch wire harnesses at the back of the trim panel, then remove the trim panel away from the dashboard and place it aside.
2013 2014 2015 DODGE RAM 1500 2500 3500 4500 car stereo installation step 4
- Remove four screws that secure the vehicle’s radio to the dashboard with a screwdriver.
2013 2014 2015 DODGE RAM 1500 2500 3500 4500 car stereo installation step 5
- Take the factory radio off the dashboard.
2013 2014 2015 DODGE RAM 1500 2500 3500 4500 car stereo installation step 6
- Disconnect the factory wire harness on the back of the radio.
2013 2014 2015 DODGE RAM 1500 2500 3500 4500 car stereo installation step 7
- Connect the wire harness to the back of the new head unit as the user manual shows.
- Put the new head unit into the dashboard and turn it on to have a careful check.
- If everything works well with the new radio, then install the four screws.
- Install the trim panel and the two screws into their original place.
Above all, if you have any further questions on the installation, please contact your dealer for further help. Before the installation, please kindly check if you have a right car stereo replacement. Here comes an amazing car stereo from Seicane which is an ideal replacement head unit for 2013 2014 2015 DODGE RAM 1500 2500 3500 4500.
This modern 2013 2014 2015 DODGE RAM 1500 car stereo comes with a variety of advanced features for you to upgrade your factory radio. You can not only get to your desired destination with the accurate guidance but also have an enjoyable journey thanks to its compatibility of a lot of multimedia formats like DVD/VCD/CD/MP3/MPEG4/DIVX/CD-R/WMA/JPEG. The availability of bluetooth to pair your mobile phone allows you to make and receive calls without taking your hands off the steering wheel control and stream your favorite music from your cell phone and other compatible portable devices. Take this fantastic car stereo for your 2013 2014 2015 DODGE RAM 1500 2500 3500 4500 and enjoy your different driving experience later on!