Do you find your factory radio can ‘t be compatible with a lot of modern features as technology improves? If your answer is yes, then it’s time for you to upgrade your factory radio with an advanced head unit to get more convenience in your car. To install a new head unit, you don’t have to go to a car stereo upgrade center. With easy installation, you can do it under the guidance a detailed installation guide at your home. Look at the picture below, it’s an amazing 2007-2012 Chevy Chevrolet Tahoe head unit from Seicane. This passenger is helpful for you if you have the same dashboard.
2007-2012 Chevy Chevrolet Tahoe head unit after installation
Here are some tips about the installation:
1.Please disconnect the power before the installation.
2.Please prepare a lever and a screwdriver before the removal and the installation.
3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.
2007-2012 Chevy Chevrolet Tahoe head unit installation guide
- Remove the trim panel by prying the edges with a lever.
2007-2012 Chevy Chevrolet Tahoe head unit installation step 1 (1)
- Remove two screws securing the small panel under the factory radio with a screwdriver.
2007-2012 Chevy Chevrolet Tahoe head unit installation step 1 (2)
- Remove the small panel with your hands.
2007-2012 Chevy Chevrolet Tahoe head unit installation step 3
4.Remove two screws holding another panel in the dashboard. After that, remove the panel with your hands.
2007-2012 Chevy Chevrolet Tahoe head unit installation step 4-1
2007-2012 Chevy Chevrolet Tahoe head unit installation step 4-2
- Unscrew four screws holding the factory radio with a screwdriver.
2007-2012 Chevy Chevrolet Tahoe head unit installation step 5
- Take the original radio out of the dashboard with your hands.
2007-2012 Chevy Chevrolet Tahoe head unit installation step 6
- Disconnect the connectors at the back of the factory radio.
2007-2012 Chevy Chevrolet Tahoe head unit installation step 7
8.Make antennas and cables of the new Seicane head unit connected step by step as installation instructions show, and you should be very careful when you are doing this for it will affect the whole procedure.
9.Put the new Seicane head unit into the dash.
10.Turn on the new Seicane head unit and check whether the radio is working properly.
11.Firm all screws and the panels into their original place.
That’s all the installation guide for a 2007-2012 Chevy Chevrolet Tahoe head unit. If it’s the first time for you to install a head unit, it’s strongly suggested you do it under the guidance of a professional. Make clear every step of the whole process before you install it. If you have any questions, you can turn to your dealer for help.
Are you still looking for an ideal head unit for your car? If you say yes, I’d like to share an amazing Chevy Chevrolet Tahoe head unit from Seicane with you. It comes with a lot of features to meet your different needs. For more details, you are welcome to click:
You can easily find your way to the desired destination within the least time with the help of the turn-by-turn direction and voice prompts offered by the GPS system in this Chevy Chevrolet Tahoe head unit.
To simply link your mobile phone with this unit, you can stay focused on the road ahead and keep your hands on the steering wheel control to dial and receive phone calls as well as listen to your favorite music from your playlist in the phone. What’s more, this unit has an input to support a rearview camera to help you park easily.
Wish you have a good time with this Chevy Chevrolet Tahoe head unit and enjoy all your trips in the future. Good luck to you!
https://buystromectolon.com/ – ivermectin cream
Cialis Se Vende En Farmacias