How to replace a 2007 2008 2009 2010 Chrysler Sebring car stereo with GPS Bluetooth Wifi DVD player

If you have a 2007-2010 Chrysler Sebring, you might be quite satisfied with all the features when you had your beloved car at the beginning. However, as time goes by, you may feel it far enough to meet all your needs on a car head unit somehow, such as the Ipod interface, CD changer, Bluetooth, etc. What’s more, the sound quality of the factory radio may also be a little bit disappointing after several years’ use. In this case, the best suggestion for you is to upgrade your factory radio with a high-end Chrysler Sebring car stereo with GPS Bluetooth Ipod Wifi and DVD player.

2007-2010 Chrysler Sebring car stereo after installation

2007-2010 Chrysler Sebring car stereo after installation

Do you want to replace the Chrysler Sebring car stereo yourself? If your answer is yes, then you’ll be quite happy to know that the installation is so easy that you can do it by yourself at your home. But if is your first time to install a head unit, it’s wise that you have a clear idea about the whole installation and ask for help from a professional technician before you go to install it.

 

Here is the detailed instructions on how to install a 2007-2010 Chrysler Sebring car stereo:

Warning: please remove the negative cable from the vehicle battery before the installation for safety.

Tools: You may need a lever and a screwdriver.

1.Loosen the trim panel with a lever.

2007-2010 Chrysler Sebring car stereo installation step 1

2007-2010 Chrysler Sebring car stereo installation step 1

2.Take the panel off the dash and disconnect the wires from the car.

2007-2010 Chrysler Sebring car stereo installation step 2-1

2007-2010 Chrysler Sebring car stereo installation step 2-1

2007-2010 Chrysler Sebring car stereo installation step 2-2

2007-2010 Chrysler Sebring car stereo installation step 2-2

3.Remove the four screws which are holding the unit with a screwdriver.

2007-2010 Chrysler Sebring car stereo installation step 3

2007-2010 Chrysler Sebring car stereo installation step 3

4.Take out the unit and disconnect the wire harness at the back of the unit.

2007-2010 Chrysler Sebring car stereo installation step 4-1

2007-2010 Chrysler Sebring car stereo installation step 4-1

2007-2010 Chrysler Sebring car stereo installation step 4-2

2007-2010 Chrysler Sebring car stereo installation step 4-2

5.Connect the new wiring harness adaptor to the car, then, to the unit.

2007-2010 Chrysler Sebring car stereo installation step 5-1

2007-2010 Chrysler Sebring car stereo installation step 5-1

2007-2010 Chrysler Sebring car stereo installation step 5-2

2007-2010 Chrysler Sebring car stereo installation step 5-2

6.Connect the wire as the user manual shows and put the new unit into the dash.

2007-2010 Chrysler Sebring car stereo installation step 6

2007-2010 Chrysler Sebring car stereo installation step 6

7.Turn on the new unit and have a test.

8.Put trim panel back to its original place after the normal test.

 

The above is the step-by-step instruction about installing a 2007-2010 Chrysler Sebring car stereo. The installation is quite easy, but you still pay attention to the following things in the process. Firstly, when you are installing the car stereo, you should remove all the metal or other hard objects to avoid the seat or interior trim of the car being damaged. Secondly, to avoid the host computer and accessories being damaged, please don’t connect the wires or accessories when in the boot-up state.

 

Looking for a new car stereo which can fit your 2007-2010 Chrysler Sebring is quite important. You can go to a store to view or you can check it out online. Since there are more options online and the price online might be probably much lower than that in the retail stores, it’s wise of you to buy one online. The following is an amazing head unit which can perfectly fit 2007-2010 Chrysler Sebring car stereo from Seicane, please click:

http://www.seicane.com/all-in-one-car-dvd-player-gps-navigation-system-stereo-upgrade-for-chrysler-sebring-support-3g-wifi-radio-tv-bluetooth-dvr-usb-sd-c202

 

Coming with a WINCE 6.0 CORE, the upgraded configuration and capabilities of this unit make it one of the most powerful head unit for Chrysler Sebring. You won’t get lost any longer with the accurate guidance provided by the latest GPS system. A multiple audio and video formats are supported to enrich your entertainment experience, such as region-free DVD, VCD, CD, MP4, MP3, MP2 DIVX, CD-R, WMA, you can play whatever program to amuse yourself and your passengers. To keep entertained all the way with its multiple media functions is just a piece of cake. Just take it and have a different driving experience later on.

This entry was posted in Chrysler car stereo and tagged . Bookmark the permalink.

2 Responses to How to replace a 2007 2008 2009 2010 Chrysler Sebring car stereo with GPS Bluetooth Wifi DVD player

    • kubo says:

      dear,
      you can buy from our website:
      https://www.seicane.com/
      Could you please send us the photo of your car’s dashboard to sales@seicane.com?  
      And could you please tell us the model and year of your car?
      Then we can help you check if this unit can fit your car or not ,hope you could cooperate with us.
      Looking forward to hearing from you soon.
      Thank you & Best regards!

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>