How to replace a 2006-2009 Ford Fusion 4-door Sedan head unit with Android 4.4.4 DVD GPS navigation system Bluetooth

Here shows you an attractive picture which is a great Seicane 2006-2009 Ford Fusion 4-door Sedan head unit after installation.

2006-2009 Ford Fusion 4-door Sedan head unit after installation

Some car owners want to upgrade the factory radio in their car, but they worry that the installation may be too difficult. Actually, to install such an aftermarket head unit in a car is quite easy. If you have some related installation experience and a correct guide, you can also easily achieve the installation at your home. If you have the same dashboard as the picture above, you can take the below Ford Fusion 4-door Sedan head unit installation guide as a reference.

Here are some tips for you before the installation:

1. Please apply the parking brake and remove the negative cable on the vehicle battery before the removal to ensure safety.
2. A lever and a screwdriver need to be prepared before the installation.

2006-2009 Ford Fusion 4-door Sedan head unit installation guide

Step 1: Remove the trim around gear shifter.

2006-2009 Ford Fusion 4-door Sedan head unit installation step 1

Step 2: Remove screws securing center console lid with a screwdriver.

2006-2009 Ford Fusion 4-door Sedan head unit installation step 2

Step 3: Remove the center console trim.

2006-2009 Ford Fusion 4-door Sedan head unit installation step 3

Step 4: Remove console side panels on both driver and passenger sides.

2006-2009 Ford Fusion 4-door Sedan head unit installation step 4

Step 5: Remove bolts securing radio bezel and AC controls.

2006-2009 Ford Fusion 4-door Sedan head unit installation step 5

Step 6: Unplug AC controls (from passenger side).

2006-2009 Ford Fusion 4-door Sedan head unit installation step 6

Step 7: Remove the radio bezel and AC controls.

2006-2009 Ford Fusion 4-door Sedan head unit installation step 7

Step 8: Remove screws securing radio to the vehicle.

2006-2009 Ford Fusion 4-door Sedan head unit installation step 8

Step 9: Take the original radio out of the dash.

Step 10:Make antennas and cables of the new Seicane head unit connected step by step as installation instructions show, and you should be very careful when you are doing this for it will affect the whole procedure.

Step 11: Put the new Seicane head unit into the dash.

Step 12: Turn on the new Seicane head unit and check whether the radio is working properly.

Step 13: Install all screws, trims, panels, bolts and the radio bezel and AC controls into their original place.

It’s normal that if you find your dashboard is not the same as the above one shown in the guide pictures, for cars in different manufacture years may have the different dashboards. However, the installation is similar. If you find it hard to understand all the steps, you’d better ask a professional for help.

Before the installation, you need to confirm that you have a right head unit for your car. If you are still looking for one, you can refer to the link below which is an intelligent 2006-2009 Ford Fusion 4-door Sedan head unit from Seicane.

http://www.seicane.com/seicane-s127302-quad-core-pure-android-4-4-4-dvd-gps-in-dash-radio-system-for-2005-2009-ford-mustang-with-16g-flash-3g-wifi-bluetooth-mirror-link-obd2-rearview-camera

This Ford Fusion 4-door Sedan head unit comes with a large 7 inch HD 1024*600 multi-touch screen to greatly facilitate the operation and provides a better viewing for videos. The various functions and entertainment features must meet all your needs on the practical convenience and relaxation from a car stereo.

You won’t get lost even in hard-to-find place with the accurate directions and voice prompts. The Bluetooth enables you to have hands-free calls and stream music for enjoyment. The USB/SD connection provides you more flexible options to relax and have fun.

Get this popular Ford Fusion 4-door Sedan head unit right now and enjoy all your trips from now on!