First shows you an attractive 2006 2007 Jeep Commander (W/Factory NAV) head unit from Seicane after installation. It comes with a lot of features to meet car owners’ different needs. If you find your factory radio can’t meet all your needs, it’ s wise of you to upgrade your factory radio with such a multifunctional head unit which can be compatible with a wide range of features. Here comes the detailed installation instruction from Seicane specially for the Jeep Commander (W/Factory NAV) head unit. If you also have the same dashboard as the below, you can refer to this guide to help with your installation.
2006 2007 Jeep Commander (W Factory NAV) head unit after installation
Tips about the installation:
1.Please disconnect the power before the installation.
2.Please prepare a lever and a screwdriver before the removal and the installation.
3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.
- For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2006 2007 Jeep Commander (W/Factory NAV) head unit installation guide
1.Loosen the trim panel with a lever.
1.Loosen the trim panel with a lever
2.Take the panel off the dash and disconnect the wires from the car.
2-1.Take the panel off the dash and disconnect the wires from the car.
2-2.Take the panel off the dash and disconnect the wires from the car.
3.Remove the four screws which are holding the original radio with a screwdriver.
3.Remove the four screws which are holding the unit with a screwdriver.
4.Take out the original radio and disconnect the wire harness at the back of the original radio.
4-1.Take out the unit and disconnect the wire harness at the back of the unit.
4-2.Take out the unit and disconnect the wire harness at the back of the unit.
5.Check all the accessories for the new Seicane unit.
5.Check all the accessories for the new Seicane car radio.
- Connect the Seicane unit to your original car radio ‘s plugs.
6-1. Connect the Seicane car stereo to your original car radio ‘s plugs.
6-2. Connect the Seicane car stereo to your original car radio ‘s plugs.
6-3. Connect the Seicane car stereo to your original car radio ‘s plugs.
7.Put the new Seicane unit into the dash.
7.Put the new Seicane stereo into the dash.
8.Turn on the new radio and have a test if the new Seicane unit is working without problem..
9.Put trim panel back on your new Seicane unit after the normal test.
Above all, you need to be clear about every step before you start to install your new 2006 2007 Jeep Commander (W/Factory NAV) head unit. If there is any question, you can consult your dealer. If it’s the first time for you to upgrade your factory radio, you’d better ask a professional for help.
By the way, do you find a suitable unit for your car? If not, you need to pick up one which can fit your car, so that it can be perfectly installed and work well with your car. Now I’d like to recommend an ideal 2006 2007 Jeep Commander (W/Factory NAV) head unit from Seicane to you. Here’s the link, please click for more details:
This intelligent Jeep Commander (W/Factory NAV) head unit is integrated with an accurate GPS navigation system which can provide the turn-by-turn direction of high accuracy and voice prompts to guide you to anywhere you’d like. Besides, you can play DVDs, CDs, VCDs, Ipod, bluetooth music to add fun and joy to your journey. If you want to keep your driving safer, you can wirelessly pair with your enabled mobile phone for hands-free calls and streaming music via the bluetooth technology. Wish you like it and have a wonderful time all the way!