As a car owner, you may wonder how to get an ideal car radio installed in your car. Under this circumstance, it is wise of you to go to a car radio upgrade center to seek help from a professional technician. Or you can also try to finish the installation with the guidance of a related installation instruction. The following is a 2006 2007 2008 2009 2010-2012 KIA Carens car radio installation instruction which can be taken as your reference if you have the same or similar dashboard.
2006 2007 2008 2009 2010-2012 KIA Carens Car Radio after installation
Precautions for this installation:
1. Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.
2. Please make sure that all fastened wires are isolated with electrical tape.
3. Please make sure the ignition is off to avoid short circuit.
4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2006 2007 2008 2009 2010-2012 KIA Carens car radio installation instruction
1. Pry around the edges of the trim panel with a lever.
Pry around the edges of the trim panel with a lever
2. Remove the trim panel.
Remove the trim panel
3. Disconnect all the connectors of the trim panel.
Disconnect all the connectors of the trim panel
4. Unscrew all the screws holding the original car radio in place with a screwdriver.
Unscrew all the screws holding the original car radio in place with a screwdriver
5. Gently take the original car radio out of the dashboard.
Gently take the original car radio out of the dashboard
6. Disconnect all connectors at the back of the original car radio.
Disconnect all connectors at the back of the original car radio
7. Check all the accessories for the new Seicane car radio.
Check all the accessories for the new Seicane car radio
8. Connect the harnesses to the back of the new Seicane car radio.
Connect the harnesses to the back of the new Seicane car radio
9. Connect the Seicane car radio to your original car radio ‘s plugs.
10. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
11. Put the new Seicane car radio into the dash.
12. Put everything into their original place. All the installation is done.
Wish you can learn some skills from the above installation guide. If you have any problems, please feel free to contact your dealer, communicate with someone experienced or turn to a professional for help. Or you can directly arrange a professional technician to help you install the new car radio directly. To help you select an ideal car radio, I would like to share a remarkable 2006 2007 2008 2009 2010-2012 KIA Carens car radio from Seicane with you.
Based on the advanced Android 7.1 operation system as well as a high-quality quad-core CPU processor, this car radio can greatly facilitates its operation and provide users with its higher performance and configurations.
With this car radio installed in your car, you can get access to a wide range of comprehensive features, mainly including 3D GPS navigation system, Bluetooth hands-free calls, Bluetooth streaming music, FM/AM radio tuner, DVD player, file management, etc.
Thanks to the high-accuracy 3D GPS navigation system of this unit, you can easily know your current locations and find the right way to reach your desired destinations according to turn-by-turn directions and voice prompts. And this unit’s dual zone function enables you to listen to your favorite music while navigating.
Wish you like this unit and good luck to you!