No matter in order to catch up with the fashion or to get the latest features, car owners can easily replace the factory radios with OEM aftermarket car stereos. After getting an ideal car stereo, some car owners may go to the upgrade center to have it installed due to the lack of experience. However, with a correct installation guide, you can also easily finish the installation with the help of a professional. Now I’d like to share a step-by-step 2005 2006 Mercury Montego car stereo installation guide from Seicane to you. Wish it can be helpful for you.
2005 2006 Mercury Montego car stereo after installation
Tips about the installation:
1.Please disconnect the power before the installation.
2.Please prepare a lever and a screwdriver before the removal and the installation.
3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.
4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2005 2006 Mercury Montego car stereo installation guide
Step 1: Remove the trim around gear shifter.
Remove the trim around gear shifter
Step 2: Remove screws securing center console lid with a screwdriver.
Remove screws securing center console lid with a screwdriver
Step 3: Remove the center console trim.
Remove the center console trim
Step 4: Remove console side panels on both driver and passenger sides.
Remove console side panels on both driver and passenger sides
Step 5: Remove bolts securing radio bezel and AC controls.
Remove bolts securing radio bezel and AC controls
Step 6: Unplug AC controls (from passenger side).
Unplug AC controls (from passenger side)
Step 7: Remove the radio bezel and AC controls.
Remove the radio bezel and AC controls
Step 8: Remove screws securing radio to the vehicle, and take the original radio out of the dash.
Remove screws securing radio to the vehicle, and take the original radio out of the dash
Step 9: Check all the accessories for the new Seicane car stereo.
Check all the accessories for the new Seicane car stereo
Step 10: Connect the harnesses to the back of the new Seicane car stereo.
Connect the harnesses to the back of the new Seicane car stereo
Step 11: Connect the Seicane car stereo to your original car radio ‘s plugs, and put the new Seicane car stereo into the dash.
Step 12: Turn on the new Seicane car stereo and check whether the radio is working properly.
Step 13: Install all screws, trims, panels, bolts and the radio bezel and AC controls into their original place.
Can you install the new 2005 2006 Mercury Montego car stereo by yourself under the guidance of the installation instruction? If not, you’d better ask a professional to help you. During the whole process, you may encounter some question, you can consult your dealer in that case.
Before the installation, you should also pay attention to the compatibility of your new car stereo. If you have no idea if your new car stereo can fit your car, you can refer to this intelligent Mercury Montego car stereo from Seicane. Here’s the link, please click:
This powerful Mercury Montego car stereo is specially designed to maximize your pleasure in your car, with which you can play DVD, CD, VCD, Ipod, TV, etc. Integrated with a GPS navigation system, you can arrive at your destination with ease. It also comes with the advanced bluetooth technology for you to sync with compatible devices for audio streaming to relax. A backup camera can be added to provide the reversing image on the large 7 inch touch screen for you to easily park.
To have an extraordinary car driving experience, this amazing Mercury Montego car stereo is just your best choice. Good luck to you!