There is no doubt that with a new multifunctional car radio installed in your car, you will be able to enjoy more convenience and enjoyment brought by it in your car all the way. If you are not satisfied with your factory radio, you can think about replacing your factory radio with a new aftermarket car radio. And to install a new car radio, you can turn to a detailed installation guide for help. If you own a 2013 2014 2015-2016 Mercedes Benz GLK X204 left hand drive and plan to upgrade your factory radio, you can refer to the following 2013 2014 2015-2016 Mercedes Benz GLK X204 left hand drive car radio installation instruction.
Tips about the installation:
1. Please disconnect the power before the installation.
2. Please prepare a lever and a screwdriver before the removal and the installation.
3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.
4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2013 2014 2015-2016 Mercedes Benz GLK X204 left hand car radio installation instruction
1. The original car radio.
2. Use a flat removal tool to pry up the air vent.
3. Remove the air vent and disconnect the connector at the back of the air vent.
4. Use the flat removal tool to pry the screen panel.
5. Use a screwdriver to remove screws that are holding teh screen.
6. Pry the car radio panel.
7. Remove the screws that are holding the car radio.
8. Use a removal tool to help you remove the original car radio.
9. Take the original car radio out from the dashboard.
10. Disconnect the connectors and cables at the back of the original car radio.
11. Check all the accessories for the new Seicane car radio.
12. Connect the harnesses to the back of the new Seicane car radio.
13. Connect the Seicane car radio to your original car radio’s plugs.
14. Turn on the new Seicane radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
15. If the new Seicane car radio works well, put it into the dash.
16. Put everything into their original place, and all the installation is done.
Wish the above installation steps can be helpful for you. If you have any doubts about your car radio or the installation steps, please feel free to contact your dealer, communicate with someone experienced or turn to a professional for help. Anyway, it is essential for you to select an ideal car radio for your beloved car. If you have no ideas, you can check out the following link which is a remarkable 2013 2014 2015-2016 Mercedes Benz GLK X204 left hand car radio from Seicane. For more details, please click:
This amazing car radio, upgraded to the advanced Android 6.0operation system and a powerful quad-core CPU processor, has higher capabilities and better performance to be the best replacement for your factory radio in your car.
With this car radio installed in your car, you don’t have to worry about getting lost any more. Thanks to the turn-by-turn directions and voice prompts provided by the high-accuracy worldwide real-time GPS navigation system of high accuracy, you will easily and quickly locate where you are and find the optimal route to reach your destinations accurately. And this unit’s dual zone function enables you to freely listen to your favorite music while navigating.
Besides, through the Bluetooth connection between your Bluetooth-enabled mobile phone and this car radio, you can dial, answer, reject and mute Bluetooth hands-free phone calls as well as freely listen to your favorite music streaming from your mobile phone music playlists without taking your hands off the steering wheel.
Wish you like this unit and good luck to you!