At the beginning of this article,you can have a look at following picture first,which is new unit after installation,dvd GPS radio support bluetooth SWC of 2009 2010 2011 Mazda CX-7.
If you are a owner of Mazda CX-7 for 2009 2010 2011 and you haven’t removed your oem factory radio,then you can find that the trim panel of it is same with yours.It means that this unir is a suitable one to your car if you are going to install a new stereo into it.
What ideas do you have about how to remove 2009 2010 2011 oem factory-style Mazda CX-7 radio stereo speaker system?Many people may say yes,of course,because everyone are more likely to make things convenient.But I guess you have some problems about this operation.Don’t worry,actually the whole process may only take about few minutes to finish it for professional staff.And it won’t be much difference when you are willing to install the unit by yourself,and you’d better do it according to right installation guide.
You may need some tools for the mount during this process, such as a screwdriver, a lever and so on.The next part will be the installation operations for Mazda CX-7 radio,please apply the parking brake and remove negative cable on car battery before you begin your actions in order to make sure your safety.
Precautions before installation:
1.Please read carefully installation instructions from the dealer if you have it
2.Please make right cables connection between the new unit and car,this is very important to your work
2009 2010 2011 Mazda CX-7 radio removal and installation:
1.Use a firm lever to pry edges of trim panel
2.Take trim panel out after it is released totally
3.Use a screwdriver remove these four screws which lay two on each side
4.Take original CD player out and disconnect cables which connected them
5.Take out four screws with a screwdriver,two as the picture show,and other two on the other side
6.Take these two screws out and get the cable down
7.After this you can take dashboard out of white part
This is the removal part and the next installation of car dvd player is easier.
8.Connect new unit’s cables to dashboard
9.Put cables and the new stereo in,fix four screws that are set aside before
10.Cover your radio with trim panel and turn on new radio to check whether your operations are all right
If you feel that you are not familiar enough with this new unit,I suggest you to search for some information from websites,for example:http://www.seicane.com/lcd-touch-screen-gps-radio-replacement-for-2009-2010-2011-mazda-cx-7-with-dvd-player-3g-wifi-bluetooth-music-dvr-steering-wheel-control-hd-1080p-ipod-iphone-aux-mp3-c097.
The best way to install the car unit is do it according to right steps in order to ensure that your radio nav system can be used for longer time.This multimedia car radio will surely make your usual life more colorful with new functions and good maintan.It’s possible that you meet some problems that can’t solve by yourself,you can ask someone who are professional in this field and wish you a successful job.