Mercedes Benz cars are very popular in car lovers,include CLS series.Maybe it’s because its design style or its splendid appearance.Except the functions car itself,car stereo may be a most important factor to car.But original cd player nowadays has difficult catching up with daily fast developing life,so we need to remove it if we want to have a better time during driving.So how to remove 2005 2006 Mercedes CLS W219 CLS350 CLS500 CLS55 autoradio head unit?This is the question that we will take into account.
If you need to know more information about the unit which can be installed in Mercedes CLS350 CLS500 CLS55,you can visit some helpful website for help,for example,next one may be a good choice which has a lot of detailed information and introduction about a suitable head unit for 2005 2006 Mercedes W219:http://www.seicane.com/all-in-one-oem-in-dash-car-gps-navigation-system-for-2005-2006-mercedes-benz-cls-w219-cls350-cls500-cls55-with-3g-wifi-bluetooth-dvd-radio-rds-tv-aux-c090.
With enough acknowledge about new Mercedes CLS W219 autoradio,I think it’s time for us to get to know the specific operations for how to remove and install a head unit of Mercedes.
2005 2006 Mercedes CLS W219 CLS350 CLS500 CLS55 stereo autoradio removal and installation:
1.Primary CD radio
2.Use a lever,loosen the decoration panel and remove the cigarette lighter
3.Unscrew two screws under the 6-disc CD changer and remove the CD changer
4.Pull out two screws which is marked out with red arrows,then remove the CD player
5.Have a look at package of connected cables
6.Take out the baffle-plate under the assistant seat,make connection between the CAN-HCAN-L cable(green)③with the CAN-BUS socket market in the picture
7.Pry the decoration panel near the driver’s seat, 5A to 10A’s change fuse
8.To fasten the car pc in the left of the trunk,move out the screws
9.You can see amplifier in the left of the trunk,seek out the amplifier and remove the four screws marked with red arrows
10.Make out car amplifier
11.Make connection between the speaker cable and the speaker socket②
12.Head unit after installation
Process for removal is over here,the following work is to install a new gps radio,which may be easier than above actions for there are a lot of things that you only need to do as front actions.
What you need to do is to make connections between new unit with car,you can carefully read installation instructions and you will find answers from it.After connecting all wires,tidy them in order to avoid damage for connectors and cables,after that install your new stereo into the car.
When you have finished these things,you can turn on your stereo and check whether it can work out.If it’s all right,then you can firm removed screws which were taken out before and make storage,shifter and upper vent housing panel back to right places.
You see the whole procedure is achieved and you will enjoy a good journey in your car.Especially the navigation system will provide you much convenience when you driving.If you have some doubts on using this dvd player,you may have a look at this video for help: