How to Install Seicane Car Radio System in Toyota Camry with 13-Step?

Big touchscreen car radio systems are seen in more and more vehicles. They are easy to operate and come with plenty of functions that greatly improve driving experience.

For older cars, they may not be equipped with an excellent factory radio due to technical limitations and cost restraint for manufacturers. The good news is these car owners can opt for the aftermarket radio system to upgrade their old one. And you can find that there are numbers of tutorials online about installing a new radio in the car. This post is one of tutorials that assist you to install a Seicane car radio navigation system in the Toyota Camry. Let’s check at them.

13 steps to remove and install car radio system in Toyota Camry

Before getting into the car, you’d better prepare screwdrivers and pry tool. And to keep safety, disconnect the car power.

Step 1, Remove the two side panels with your hands.

Step 2, Remove these two screws at first.

Step 3, Power your vehicle to set up the emergency brake, then we need to remove this plastic handle. Just use your hands to remove it. Don’t forget to cut off the car power again after this step.

Step 4, Pull out the container panel with your hands. Be carefully.

Step 5, Next you need to remove the whole container structure.

Step 6, Now we can remove this part as we have loosen the screws at Step 2, and you need to unplug the connectors.

Step 7, At this time, we go to remove the vent. Use a plastic tool to pry the vent and plug the connector.

Step 8, Following we are planning to remove the whole radio system. You can find that there are four screws we need to remove, two at upper inside, two at bottom inside.

Step 9, After removing the four screws, we can take down the whole radio system, also unplug its connectors.

Step 10, And we need to remove these three control buttons of the old radio, in order to install them on the new Seicane car radio.

Step 11, The removal of the original radio is finished, we are ready to install the Seicane car radio system with GPS. Firstly, have a check for the cables and accessories of the new radio.

Step 12, This step will require your patient and carefulness to connect the cables between new radio and car plugs, so have your user manual handy will be helpful.

Step 13, After connecting the cables, you are advised to turn on the car and test the new radio. If it works well, then you can put everything back; If not, check whether you connect the cables correctly.

Compared to lots of vehicles, the basic radio of Toyota Camry is not so difficult to remove. With the new radio, you also have different driving experience.

Seicane car radio navigation system change your driving style

Have more fun in the car

Music is an integral part of long road trips, a decent car radio with quality sound effects will add more joy. The Seicane car radio not only provides users with countless music offline/online, but support videos playing. Besides, users can connect their smartphone to this radio to use Carplay. They can also surf the Internet since the radio support 4G and WIFI network.

Keep easier drive on the road

Seicane car radio comes with built-in GPS module, supports various map apps to display the latest navigation information. By checking the precise, real time and comprehensive navigation information in the 10.1 inches large screen, drivers can go everywhere quickly and will not lose.

Increase driving safety

All we know that picking up the phone while driving is very dangerous. Since integrated with Bluetooth module, Seicane android car radio supports phonebook sync, hands-free call etc. from your phone, thus you just need to click the call on the radio display, then you can answer it without letting go of the steering wheel control. On the other hand, it’s easy to connect a rear view camera to the radio, this car camera allows you to check rear situation with HD images when reversing, therefore, park the car easier.