When it comes to installing a car stereo, you may think it can only be achieved by a technician with some expertise and experience. In fact, you are wrong. You are also able to succeed under the guidance of a correct installation instruction even if you don’t have professional knowledge. This article introduces a step-by-step 2009-2014 Hyundai TUCSON dvd gps Sat Nav installation instruction from Seicane. If your dashboard is the same as or similar to the image shown below, you can read it carefully.
2009-2014 Hyundai TUCSON dvd gps Sat Nav after installation
Before and during installation, you should notice:
1.Before connecting, please make sure the ignition is off to avoid short circuit.
2.Ensure connect the yellow and red power cable at last.
3.Ensure that all loose wires are isolated with electrical tape
4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).
5.Ensure that all ground is connected to the same place.
6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.
7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400
2009-2014 Hyundai TUCSON car stereo installation instruction
1.The original car radio.
The original car radio
2.Pry the top panel out of the dash with a plastic knife.
Pry the top panel out of the dash with a plastic knife
3.Remove two screws on the top that fixed the radio on the dashboard with a screwdriver.
Remove two screws on the top that fixed the radio on the dashboard with a screwdriver
4.Pry the AC control out of the dash with a plastic knife and unplug all the connectors behind.
Pry the AC control out of the dash with a plastic knife and unplug all the connectors behind
4-1
4-2
5.Remove another two screws that fixed the radio one the dashboard.
Remove another two screws that fixed the radio one the dashboard
6. Gently pull the factory radio out of the dash.
Gently pull the factory radio out of the dash
7. Then unplug the connectors at the back of the factory radio.
Then unplug the connectors at the back of the factory radio
8. Check all the accessories for the new Seicane car radio.
9. Connect the harnesses to the back of the new Seicane car radio.
10. Connect the Seicane car radio to your original radio’s plugs.
11. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
12. Put the new Seicane car radio into the dash.
13. Put everything into their original place. All the installation is done.
Now do you have a general idea about how to install a 2009-2014 Hyundai TUCSON dvd gps Sat Nav by yourself? If not, you are welcome to seek advice from your dealer or ask a professional for help. Anyway, before the installation, please check the compatibility between your new car stereo and your car. If it is not compatible, it suggests you to quit it and purchase a suitable one. You may search online and check the following link which is about a 2009-2014 Hyundai TUCSON dvd gps Sat Nav from Seicane.
Based on the latest Android 5.1.1 operation system as well as a 1.6 GHz Cortex A9 Quad-core CPU, this 2009-2014 Hyundai TUCSON dvd gps Sat Nav will be the your beat choice to upgrade your factory radio up to now. It is equipped not only GPS navigation in high accuracy but also DVD/CD player and Bluetooth module as well. With this unit in your car, you won’t easily feel board and tired anymore while you are driving. Besides, it also greatly ensures your driving safety in a large extent. Wish you like it!
Serum Sickness Clinical Signs Amoxicillin