How to install a 2015 Toyota Sienna Radio with 12 steps

First show you the image of Seicane Toyota Sienna Radio after installation. If you have the same dashboard with it, you can follow the steps below.

2015 Toyota Sienna Radio after installation

2015 Toyota Sienna Radio after installation

Nowadays, more and more people choose 2015 Toyota Sienna. Some of you may be the owners of Toyota Sienna. To be honest, its original radio has few functions. It can hardly meets all your needs. If you want to have a better in-car environment, you should just remove your original radio and install a new aftermarket radio. Today, I’ll share some professional experience with you.

 

 

2015 Toyota Sienna Radio installation

1·First remove the negative cable from the battery.

2·Then return to the inside of the Toyota Coralla, pry off the control panel with a plastic tool and pull it out.

2015 Toyota Sienna Radio installation step 1

2015 Toyota Sienna Radio installation step 1

3·Then pull out the shifter knob.

2015 Toyota Sienna Radio installation step 2

2015 Toyota Sienna Radio installation step 2

4·Remove the top panel.

2015 Toyota Sienna Radio installation step 3

2015 Toyota Sienna Radio installation step 3

5·Remove the screws holding the dash panel in place.

2015 Toyota Sienna Radio installation step 4

2015 Toyota Sienna Radio installation step 4

6·Remove the dash panel.

2015 Toyota Sienna Radio installation step 5

2015 Toyota Sienna Radio installation step 5

7·Remove screws holding the radio in the dash.

8·Take out the original radio and disconnect wiring behind it.

9·Make antennas and cables connected step by step as installation instructions show, and you should be very careful when you are doing this for it will affect whole procedure.

10·Connect the new Toyota Sienna Radio to your Toyota Sienna, you should check your connections, the new unit’s position, and you’d better have a tidy for the cables.

11·Check whether the unit is working properly.

12·If everything is OK, firm four removed screws that are put aside, then make trim panel back on your new unit.

 

Before the original radio removal, I’d like to share a good unit with you:

http://www.seicane.com/10-2-inch-aftermarket-android-radio-gps-navigation-system-for-2015-toyota-sienna-with-capacitive-touch-screen-tpms-dvr-obd-ii-headrest-monitor-control-usb-sd-bluetooth-3g-wifi-video-aux-rear-camera-s082705

 

If you don’t know which unit is better, this one can be a good choice for you.

This unit designed with an attractive 10.2 inch 1024*600 capacitive multi-touch screen, this 2015 Toyota Sienna Radio provides an easier operation and a visually radiant display. You can also enjoy a smooth performance thanks to the Android 4.2 operation system. Turn on the GPS function, lane assist, landmark display, POIs, 3D street view, turn-by-turn direction and voice prompts can all be offered to you to reach your destination. It also comes with bluetooth technology for you to sync with your enabled cell phone for hands-free calls and streaming music. TPMS, DVR, OBD II and the rearview camera can also be added as options for more features in your car.

This entry was posted in Toyota car stereo and tagged . Bookmark the permalink.

One Response to How to install a 2015 Toyota Sienna Radio with 12 steps

  1. seneswove says:

    http://buystromectolon.com/ – ivermectin for scabies

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>