How to Install a 2015 Nissan Murano Car Radio with Bluetooth GPS Audio System CD DVD Player

Among many ways to upgrade your in-car life, frankly speaking, one of the easiest and most effective ways is to replace your factory radio with a brand new multifunctional car radio. With such an ideal car radio installed in your car, you can enrich your in-car life to some extent. Here I would like to share a 2015 Nissan Murano car radio installation guide from Seicane with you. If you have the same or similar dashboard, you may read it and take it as a reference.

2015 Nissan Murano Car Radio after installation

2015 Nissan Murano Car Radio after installation

Before and during installation, you should notice:

1. Before connecting, please make sure the ignition is off to avoid short circuit.

2. Ensure connect the yellow and red power cable at last.

3. Ensure that all loose wires are isolated with electrical tape

4. Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5. Ensure that all ground is connected to the same place.

6. Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2015 Nissan Murano car radio installation guide

1. Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside.

Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside

Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside

2. Remove screws that fixed the radio on the dashboard.

Remove screws that fixed the radio on the dashboard

Remove screws that fixed the radio on the dashboard

3. Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio.

Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio

Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio

4. Unplug the connectors at the back of the factory radio.

Unplug the connectors at the back of the factory radio

Unplug the connectors at the back of the factory radio

5. Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure.

Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure

Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure

6. Put the new Seicane radio into your car, you should check whether your connections are correct, and you’d better have a tidy for the cables.

7. If everything is OK, firm screws into their original place.

If everything is OK, firm screws into their original place

If everything is OK, firm screws into their original place

8. Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio.

Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio

Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio

 

Wish you can finish the whole installation process successfully. Before installation, please make clear every detailed step. If you have any doubts, you can contact your dealer, communicate with someone experienced or turn to a professional for help. If you still think it hard for you to install a new car radio by yourself, you’d better go to a car radio upgrade center to arrange a professional technician to help you install the new car radio.

As for the selection of an ideal car radio. If you have no ideas, you can refer to the following link which is an excellent 2015 Nissan Murano car radio from Seicane. For more details, please click:

https://www.seicane.com/in-dash-android-2015-nissan-morano-radio-gps-navigation-system-with-hd-touchscreen-mirror-link-4g-wifi-bluetooth-music-obd2-backup-camera-digital-tv-s18n225

Based on the intelligent and stable Android 7.1 operation system and a high-quality quad-core CPU processor, this car radio can bring you a much smoother, faster and easier operation experience.

This unit comes with a wide range of upgraded or new comprehensive features, mainly including 3D GPS navigation system, Bluetooth hands-free calls, Bluetooth streaming music, FM/AM radio tuner, USB or SD card connection, file management, etc. By taking full advantage of these features, you can enrich your in-car life effectively.

Apart from these basic features, there are also some optional features being supported to be added to this unit according to your requirement and your reference, mainly including car DVR, OBD2, DAB, TPMS, etc.

Wish you like this unit and have a wonderful driving experience. Good luck!

This entry was posted in Uncategorized and tagged . Bookmark the permalink.

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>