If you would like to upgrade your factory radio but don’t want to spend a lot of money on upgrading the car, you can easily replace your factory radio with a brand new car radio on your own. Under this circumstance, you can find a related car radio installation guide and follow it to deal with the installation. Here I would like to share a detailed 2007 2008 2009 2010 Jeep Wrangler Unlimited car radio installation guide from Seicane with you. If you also own the same or similar dashboard, you can read it and take it a reference.
Before and during installation, you should notice:
1. Before connecting, please make sure the ignition is off to avoid short circuit.
2. Ensure connect the yellow and red power cable at last.
3. Ensure that all loose wires are isolated with electrical tape
4. Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).
5. Ensure that all ground is connected to the same place.
6. Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.
7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2007 2008 2009 2010 Jeep Wrangler Unlimited car radio installation guide
1. The original car radio.
2. Grab at the bottoming plastic cover, push the bottoming box and release it.
3. Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside.
4. Unplug the connectors at the back of panel.
5. Remove four screws that fixed the radio on the dashboard.
6.Gently pull the factory radio out of the dash. Then unplug the connectors at the back of the factory radio.
7. Check all the accessories for the new Seicane head unit.
8. Connect the harnesses to the back of the new Seicane head unit.
9. Connect the Seicane head unit to your original head unit ‘s plugs.
10. Turn on the new Seicane head unit to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
11. Put the new Seicane head unit into the dash.
12. Put everything into their original place. All the installation is done.
Wish you can learn some skills from the above installation process successfully. Before installation, please make clear every detailed step. To overcome the difficulties you meet, it is suggested that you should contact your dealer, communicate with someone experienced or seek help from a professional technician. If you are still looking for an ideal car radio but don’t have any ideas, you can check out the following link which is an amazing 2007 2008 2009 2010 Jeep Wrangler Unlimited car radio from Seicane. For more details, please click:
Based on the super stable Android 7.1 operation system and a powerful quad-core processor with great performance, this intelligent car radio can be regarded as one of the best choices to replace your factory radio.
With this car radio installed in your car, you can get access to a wide range of upgraded and new features, mainly including 3D GPS navigation system, Bluetooth hands-free calls, Bluetooth streaming music, DVD player, FM/AM radio tuner, file management, etc.
Apart from these basic features I mentioned before, there are some optional features being supported to be added to this unit, mainly including car DVR, OBD2, DAB, backup camera, TPMS, etc.
By making full use of these comprehensive features, you will have a wonderful in-car life accompanied by this multifunctional car radio. Good luck to you!