At present, it’s easier for people to get a car, like a NISSAN TREEANO. However, as time goes by, some of you may find that the factory radio with single function is far enough to meet most of your needs. In that case, you can consider replacing your factory radio with a new aftermarket head unit. Please look at the image below which is a new 2005-2010 NISSAN TREEANO car stereo from Seicane, if you have the same dashboard, you can read this NISSAN TREEANO car stereo installation guide carefully to help you install your new head unit.
2005-2010 NISSAN TREEANO car stereo after installation
Precautions:
- Please apply the parking brake before the installation.
- For your safety, please disconnect the negative cable on the vehicle battery.
- Please prepare a lever and a screwdriver for the installation.
2005-2010 NISSAN TREEANO car stereo installation guide
Step 1:
Use a screwdriver to remove two screws above the Nissan Frontier radio.
2005-2010 NISSAN TREEANO car stereo installation step 1
Step 2: Remove the trim panel.
Please wedge a flat tip screwdriver under the trim panel and pry up on it to remove the trim panel. To protect the trim from being accidentally scratched, you can use a clean rag while prying up on the trim panel.
2005-2010 NISSAN TREEANO car stereo installation step 2
Step 3: Unscrew the four screws which are holding the factory radio in place with a screwdriver. Then gently take the factory radio off the panel.
2005-2010 NISSAN TREEANO car stereo installation step 3
Step 4: Disconnect the radio antenna in the back of the factory radio and unplug the electrical plugs running to the back of the radio.
2005-2010 NISSAN TREEANO car stereo installation step 4
Step 5: Connect the antenna in the back of the new Seicane car stereo and plug the electrical plugs running to the back of the car stereo. If you have any question on how to connect the antenna to new car stereo, please take the user manual as a reference or turn to the dealer for a wiring diagram.
Step 6: Turn on the new Seicane car stereo to have a careful check if it works well with your car. If it doesn’t, please check whether all the cables are connected correctly.
Step 7: After the test, please put the new Seicane car stereo into the dash.
Step 8: Install all the screws and the trim panel into their original place.
All in all , the installation is quite simple, but you need to make clear every step so that you can successfully install it. If you have any questions, you can ask your dealer or a professional for help. If it’s the first time for you to install a car stereo, it’s strongly suggested you install it under the guidance of a professional. Or wrong installation will cause irreparable damage to both your car and the new stereo.
Besides, a suitable car stereo is also quite vital. You need to check the compatibility of the new stereo with your car. If you are unsure about this, you can refer to the following Seicane 2005-2010 NISSAN TREEANO car stereo, please click:
With this multifunctional NISSAN TREEANO car stereo in your car, you are able to enjoy your favorite movies, TV programs, music videos, dramas and cartoons on the amazing 7 inch HD 1024*600 touch screen as you watch them in your home.
Find your way with the help of the turn-by-turn direction and the voice prompts, you can easily get to a lot of locations on time. A safe and pleasant journey is always with you when you sync your mobile phone with this unit. Amuse your passengers by playing Bluetooth music, videos, iPod, radios, etc. You’ll have a different driving experience with you.
Wish you like this advanced NISSAN TREEANO car stereo and have a wonderful time with it from now on!