To enrich in-car life and have a brand new driving experience, some car owners may but a new car for higher performance. However, as far as I am concerned, that is not an adoptable way for most car owners who don’t want to spend a lot of money. Under this circumstance, it is wise of you to replace your factory radio with a brand new car radio with comprehensive features. Here I’d like to share a 2004 2005 2006 2007 2008-2012 Mercedes Benz B Class W245 B150 B160 B170 B180 B200 B55 car radio installation guide from Seicane with you. If you have the same or similar dashboard, you can take this installation guide as a reference.
Before and during installation, you should notice:
1. Before connecting, please make sure the ignition is off to avoid short circuit.
2. Ensure connect the yellow and red power cable at last.
3. Ensure that all loose wires are isolated with electrical tape
4. Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).
5. Ensure that all ground is connected to the same place.
6. Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.
7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2004 2005 2006 2007 2008-2012 Mercedes Benz B Class W245 B150 B160 B170 B180 B200 B55 car radio installation guide
1. The original car radio.
2. Remove the air vent with a plastic removal tool and then put it aside.
3. Remove the trim panel with a plastic removal tool.
4. Remove four screws that fixed the radio on the dashboard.
5. Take out the original car radio.
6. Unplug the connectors at the back of the original radio.
7. Check all the accessories for the new Seicane car stereo.
8. Connect the harnesses to the back of the new Seicane car stereo.
9. Connect the Seicane car stereo to your original radio’s plugs.
10. Turn on the new Seicane car stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
11. Put the new Seicane car stereo into the dash.
12. Put everything into their original place. All the installation is done.
Wish you can learn some skills from the above installation guide. Before installation, please make clear every detailed step. If you have any problems, you can seek help from your dealer or a professional. Besides, it is essential for you to pick an ideal car radio for your beloved car. If you have no ideas, you can refer to the following link which is a remarkable 2004 2005 2006 2007 2008-2012 Mercedes Benz B Class W245 B150 B160 B170 B180 B200 B55 car radio from Seicane. For more details, please click:
Loaded with the stable Android operation system and a powerful quad-core CPU processor with great performance, this intelligent car radio can be regarded as one of the best choices for you to replace your factory radio.
This car radio comes with a wide range of upgraded and new features such as high-end 3D GPS navigation system, Bluetooth hands-free calls, Bluetooth streaming music, FM/AM radio tuner, USB or SD card connection, file management, etc. Therefore, by making full use of these features, you are able to enrich your in-car life to a large extent.
Apart from these basic features, there are some optional features being supported to be added to this unit according to your preference and requirement, mainly including car DVR, OBD2, DAB, TPMS, etc. And you will gain a lot of convenience.
Wish you like this unit and good luck to you!