Would you like to enjoy both convenience and entertainment in car or have a brand new driving experience? If yes, then it is necessary for you to replace your original factory car radio with a brand new multifunctional car radio. The following is a 2003 2004 2005 2006 2007 Fiat Idea car radio installation instruction. If you own the same or similar dashboard, you can refer to the following instruction carefully.
Before and during installation, you should notice:
1. Before connecting, please make sure the ignition is off to avoid short circuit.
2. Ensure connect the yellow and red power cable at last.
3. Ensure that all loose wires are isolated with electrical tape
4. Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).
5. Ensure that all ground is connected to the same place.
6. Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.
7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2003 2004 2005 2006 2007 Fiat Idea car radio installation instruction
1. Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside.

Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside
2. Remove screws that fixed the radio on the dashboard.
3. Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio.

Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio
4. Unplug the connectors at the back of the factory radio.
5. Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure.

Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure
6. Put the new Seicane radio into your car, you should check whether your connections are correct, and you’d better have a tidy for the cables.
7. If everything is OK, firm screws into their original place.
8. Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio.

Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio
If you have any doubts, please feel free to contact your dealer, communicate with someone experienced or turn to a professional for help. Or if you are afraid of making damage to either your car radio or your car, you can directly go to a car radio upgrade center and arrange a professional technician to help you install the new car radio. Anyway, before installation, it is essential for you to select an ideal car radio. If you have no ideas, you can refer to the following link which is a remarkable 2003 2004 2005 2006 2007 Fiat Idea car radio from Seicane.
This car radio is running on the stable Android 7.1 operation system, a powerful quad-core CPU processor and 2GB RAM, which can greatly facilitate the operation and enhance performance for you to upgrade your factory radio in 2003 2004 2005 2006 2007 Fiat Idea.
With this car radio installed in your car, you can freely get access to 3D GPS navigation system, radio tuner, DVD player, Bluetooth hands-free phone calls, Bluetooth streaming music, USB or SD card connection, file management, etc.
Under the guidance of the turn-by-turn direction and prompts provided by the high-end 3D GPS navigation system, you are able to easily locate where you are and find the right way to reach any locations you would like to go to accurately. Besides, this unit has dual zone function, which enables you to listen to your favorite music while navigating.
What are you waiting for? Just keep this top car radio with you. Wish you have a good trip accompanied by it.