At first show you a picture of Seicane 2014 Opel Insignia Radio after installation. Do you think it’s awesome?
As we all know, Opel Insignia is a good choice for us. But the original radio of Opel Insignia is hard to meet all our needs. The way to solve this problem is, just install a new aftermarket radio for your Opel Insignia.
Before the installation, you should make it sure whether the new aftermarket radio fits your car well.This is the first thing you should do. Here is a good unit of Seicane which fits 2014 Opel Insignia:
This Opel Insignia Radio has intelligent android 4.4 operation system, high quality RK PX3 with 1.66 GHz frequency Quad-core CPU, and 8 inch HD 1024*600 Pixels multi touch screen with smooth operation high sensitivity.
Loaded with a lot of upgraded software and hardware components, this remarkable 2014 Opel Insignia Radio will bring you a totally different driving experience for you. You can enjoy a visually radiant display and an easier operation on its 8 inch multi-touch screen with 1024*600 pixel resolution. The built-in GPS can support updating the latest traffic information and provide turn-by-turn voice direction for you to get to the desired location. You can enjoy playing DVDs, VCDs, bluetooth music, FM/AM radio tuner to enrich your journey. You can also connect your bluetooth-enable cell phone with this unit for hands-free calls and streaming audio to ensure a safe and cheerful journey. Your steering wheel control can still work after installation.
2014 Opel Insignia Radio installation
1)First remove the glove box with a plastic tool and set it aside.
2)Then pry the both sides trim panel with a plastic tool, set trim panels aside.
3)Remove four screws holding the center control with a Phillips screwdriver.
4)Now pull out the whole center control.
5)Disconnect the connection between the monitor and center control panel.
6)Unplug connectors behind the monitor and the center control panel, then set it aside.
7)Remove two 10mm bolts holding the radio in dash.
8)Pull out the radio and unplug the connectors behind it.
9)Make antennas and cables connected step by step as installation instructions show,and you should be very careful when you are doing this for it will affect whole procedure.
10)Connected the new Seicane radio to your Opel Insignia, you should check whether your connections are correct, the new unit is in right position,and you’d better have a tidy for the cables.
11)If new radio working properly, firm bolts and screws then make panels back on your new Seicane aftermarket radio.
A new driving experience is here waiting for you, have fun with your new Opel Insignia Radio.