This is a head unit car stereo radio gps dvd with nav system of 2014 Jeep Grand Cherokee.You will know whether this stereo can be installed in your car by comparing their trim panels between this unit and original one.
head unit car stereo radio gps dvd with nav system of 2014 Jeep Grand Cherokee
Do you have a car of Jeep Grand Cherokee for 2014?If your answer is yes and you want to upgrade its sound system,then you can patiently read this article that will tell you how to install 2014 Jeep Grand Cherokee radio stereo gps dvd support Bluetooth TV Ipod.
Many people begin to upgrade car audios is just like we are changing our cellular phones very rapidly.If you have no time to do it yourself,a professional staff can do this only if you pay him corresponding fees.And is it possible to do by yourself?
I can say yes because a lot of drivers have demonstrate this fact that succeed installing Jeep Grand Cherokee radio.It doesn’t need technical skills but right removal tools,and you should be gentle when you are prying something and keep well car parts after removal.
Some tips before installation:
1.You’d better make enough preparation for your installation work by searching enough information about this unit,and next website may help you a lot:http://www.seicane.com/digital-touch-screen-stereo-upgrade-gps-navigation-2014-jeep-grand-cherokee-with-dvd-bluetooth-tv-ipod-3g-wifi-aux-c349;Preparing tools which will be used in the process
2.Please disconnect negative negative cable before you begin to work,this will ensure you more safer
3.Have a check for your car series include the radio to see whether everything is ok and then turn off them and park your car well
2014 Jeep Grand Cherokee radio stereo removal and installation:
1.Prize lower control buttons with a pry tool, release and remove it
Prize lower control buttons with a pry tool, release and remove it
2.Make cables behind it connected,you can use a tool to help you if it is hard to remove,then remove control buttons and put is aside
Make cables behind it connected,then remove control buttons and put is aside
3.Make 2 screws out,each side has one
Make 2 screws out
4.Use a lever gently pry edges around trim panel,release and remove it
Use a lever gently pry edges around trim panel
5.Make 4 screws beside CD radio out,which has two on each side
Make 4 screws beside CD radio out
6.Take factory stereo out and unplug cables behind it
Take factory stereo out and unplug cables behind it
This 6 steps is about how to remove original car stereo and next we will learn Jeep Grand Cherokee new audio system installation.It can normally divided into 3 steps.
1.Connecting cables and antennas of new unit to those of cars,this affair may be the most difficult thing for most people for things containing wires is always more complex than other things.So you should be very serious to do it.
You can read the installation instructions within your new stereo carefully and do the connection step by step.
2.After that,install new radio in car and turn on your radio to see whether your installation is correct
3.If new radio is ok,then make other removed parts back on car,including scrws and trim panel
Precautions after installation:
1.Please do not use any chemicals to wash it,neither other kind of cleaning products
2.Please do not be too excited after successful installation,remember that keeping you safe can only enjoy more entertainments,so do not stare at it when you are driving
3.When you are driving on a rainy day,you should pay more attention to the touch screen of head unit,for moisture may gather on it and cause damage to the machine
4.Please change the exhausted batteries in time in order to make your upgraded radio can be used longer