Upgrading car stereos is becoming a popular trend among many people,we know that drivers are always willing to spend more time and money on their beloved cars because they take it as a symbol of status.If you are a owner of Toyota Corolla Altis for 2007-2013,you may one of them but you don’t know how to install 2007-2013 Toyota Corolla Altis aftermarket audio navigation system.
Don’t worry,this is exactly the object of this article that want to let more people know the installation for Toyota Corolla Altis aftermarket audio and hope it can help you to deal with some doubts.First of all,we can have a look at the head unit after upgrade,bluetooth dvd gps navigation system of 2007-2013 Toyota Corolla Altis.
head unit after upgrade,bluetooth dvd gps navigation system of 2007-2013 Toyota Corolla Altis
This is one suitable unit for the car,it can be installed in these cars without problem if you can install it under right instructions.And this unit is a normal one and it also suits other cars only if their trim panels are same,thus you need to ensure a right unit for your car and then learn detailed operations for car dvd installation.
Please turn off your original radio before you shut down your car.Make sure that you have finished all parking series and check the unit to see whether everything of it is all right.Next you will see whole installation procedure for Toyota Corolla Altis aftermarket audio and can own a general idea about it.
2007-2013 Toyota Corolla Altis autoradio removal:
1.Pry the panel around brake with a lever and unplug the wires
Pry the panel around brake with a lever
unplug the wires
2.Take the small middle control button out and take the screw out
Take the small middle control button out
remove the screw with a screwdriver
3.Open the below panel and gently pull off it
take the screw out
- Use a pry tool prize trim panel
Use a pry tool prize trim panel
5.Get four screws out with a screwdriver
Get four screws out with a screwdriver
6.Prize the trim panel in certain places which seems obvious
pry right side of trim panel
pry left side of trim panel
7.After that you can slowly get CD player out
slowly get CD player out
8.Unplug the cables between the original radio and the car
Unplug the cables between the original radio and the car
Afetr above 8 steps of removal,you can install your new unit as the following steps say:
2007-2013 Toyota Corolla Altis new audio installation:
9.Connect all cables,antennas and connectors between the unit and car,after correct connection,then gently install new stereo in your car
10.Firm screws to the car and make the dashboard,panel back to their original places
After installation,turn on your radio and check its functions,if it can work normally,it means that you have finished installation successfully.If not,please check again your steps especially the cable connection.
Because connecting wiring is a little complex and it may lead the machine’s out of work if one of them is connected wrong.Therefore you should pay more attention on it and be very serious to do it.Believe that it’s not a difficult thing and you will of course achieve it when other people has demonstrates it.
Have enough understanding about this new radio?If not and you may need more details about it,then you can visit some websites to get it,for example:http://www.seicane.com/8-inch-in-dash-dvd-bluetooth-head-unit-for-2007-2013-toyota-corolla-altis-with-gps-touch-screen-am-fm-radio-aux-mp3-backup-camera-pop-c063.And you can also reflect your problem after your installation and within your later usage,they will try to provide you better solutions.