Among ways to upgrade car owners’ in-car life, I think one of the most effective ways is to replace their factory radio with a new aftermarket car radio since an ideal car radio plays very important role in a car. If you also want to install a new car radio, you can searching for a suitable car radio installation guide and follow it carefully. The following is a 2006 2007 2008 2009 2010-2012 SUZUKI SX4 car radio installation guide from Seicane. If you own the same or similar dashboard, you can refer to this guide carefully.
2006 2007 2008 2009 2010-2012 SUZUKI SX4 Car Radio after installation
Some tips before the installation:
1. Please disconnect the power before the installation.
2. Please prepare a lever and a screwdriver before the removal and the installation.
3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.
4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2006 2007 2008 2009 2010-2012 SUZUKI SX4 car radio installation guide
1. The original car radio.
The original car radio
2. Remove two side panels.
Remove two side panels
3. Remove four screws that are holding the radio.
Remove four screws that are holding the radio
4. Gently pull out the original radio.
Gently pull out the original radio
4-1
5. Disconnect the connectors and cables at the back of theradio.
6. Check all the accessories for the new Seicane car radio.
7. Connect the harnesses to the back of the new Seicane car radio.
8. Connect the Seicane car radio to your original radio’s plugs.
9. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
10. Put the new Seicane car radio into the dash.
11. Put everything into their original place. All the installation is done.
That’s the whole installation process for a 2006 2007 2008 2009 2010-2012 SUZUKI SX4 car radio. If you encounter any problems and don’t know how to solve them, it is highly suggested that you seek help from your dealer, someone experienced or a professional. Or if you are afraid of making damage to either your car radio or your car, you can directly arrange a professional technician to help you install the new ca radio.
What’s more, if you are still looking for an ideal car radio for your beloved car, here I’d like to share a marvelous 2006 2007 2008 2009 2010-2012 SUZUKI SX4 car radio from Seicane with you. You may click the link below for more information.
This car radio specific for 2006 2007 2008 2009 2010-2012 SUZUKI SX4 can support a lot of comprehensive features, mainly including built-in 3D GPS navigation system, FM/AM radio tuner, Bluetooth hands-free calls, Bluetooth streaming music, file management, etc.
Here we take built-in GPS navigation system as an example. With the assistance of the built-in 3D GPS navigation system, you won’t get lost any more since you can easily locate where you are and navigate to your desired destinations according to turn-by-turn directions and voice prompts. And this unit comes with dual zone function, which makes it possible for you to freely listen to radio, USB or SD card music playback. So you will gain a lot of fun in car.
This car radio is at a competitive price at present. If you like it, don’t hesitate to add it to your shopping cart right now.
cialis makes you last longer
https://buystromectolon.com/ – ivermectin 3mg
Sinus Cephalexin