How to Achieve the Removal and Installation Process of a 2007 2008 2009 2010 2011-2014 Mazda CX-7 GPS Bluetooth Car Radio

Do you have a plan to replace your factory radio with a new aftermarket car radio?If yes, you must be curious about the removal of the factory radio and the installation of a new car radio. This article aims to introduce 2007 2008 2009 2010 2011-2014 Mazda CX-7 car radio removal and installation steps from Seicane to you. If you find your dashboard is similar to or just the same as the image below, just refer to the following guide carefully.

2007 2008 2009 2010 2011-2014 Mazda CX-7 GPS Bluetooth Car Radio after installation

2007 2008 2009 2010 2011-2014 Mazda CX-7 GPS Bluetooth Car Radio after installation

Precautions for this installation:

1. Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.

2. Please make sure that all fastened wires are isolated with electrical tape.

3. Please make sure the ignition is off to avoid short circuit.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2007 2008 2009 2010 2011-2014 Mazda CX-7 car radio installation steps

1. Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside.

Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside

Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside

2. Remove screws that fixed the radio on the dashboard.

Remove screws that fixed the radio on the dashboard

Remove screws that fixed the radio on the dashboard

3. Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio.

Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio

Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio

4. Unplug the connectors at the back of the factory radio.

Unplug the connectors at the back of the factory radio

Unplug the connectors at the back of the factory radio

5. Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure.

Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure

Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure

6. Put the new Seicane radio into your car, you should check whether your connections are correct, and you’d better have a tidy for the cables.

7. If everything is OK, firm screws into their original place.

If everything is OK, firm screws into their original place

If everything is OK, firm screws into their original place

8. Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio.

Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio

Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio

 

Before installation, please make clear every detailed removal and installation step. If you cannot fully understand these steps, please don’t hesitate to seek help from your dealer, someone experienced or a professional. If you still think the installation process is too complicated for you, you’d better go to a car radio upgrade center and have the new car radio installed by a professional technician.

Additionally, it is vital for you to pick an ideal car radio for your beloved car. If you have no ideas,  you can refer to the following link which is an amazing 2007 2008 2009 2010 2011-2014 Mazda CX-7 car radio from Seicane.

https://www.seicane.com/autoradio-android-gps-navigation-system-for-2007-2014-mazda-cx-7-with-dvd-player-mirror-link-multi-touch-screen-obd-dvr-bluetooth-rear-view-camera-tv-usb-sd-3g-wifi-s167007

This excellent car radio’s operation system has been upgraded to the advanced Android 7.1 version and it has a powerful quad-core CPU processor to improve its performance.

It can support a wide range of practical and entertainment features, which mainly include 3D GPS navigation, FM/AM radio tuner, DVD player, Bluetooth hands-free phone calls, Bluetooth streaming music, file management, AUX, file management, etc.

Thanks to the worldwide real-time GPS navigation system of high accuracy, you can quickly know your current locations and find the right way to reach your desired destinations according to turn-by-turn directions and voice prompts provided by the high-end 3D GPS navigation system. What’s more, thanks to this unit’s dual zone function, you can freely listen to radio, USB or SD card music playback under GPS mode, which won’t have negative influence on GPS function.

This car radio is at a competitive price now. If you like it, don’t forget to add it to your shopping cart. Good luck!

This entry was posted in Uncategorized and tagged . Bookmark the permalink.

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>