If you want to save some money on installing an aftermarket head unit for your car, why not consider doing it by yourself? With a correct installation guide, you can also learn how to install a head unit. Today I would like to introduce an installation instruction from Seicane for a 2015 Peugeot 308S navigation system dvd player. If you have a same or similar dashboard, you may refer to it and see if you can do it.
2015 Peugeot 308S navigation system dvd player after installation
Here are some tips before the installation:
1.Please disconnect the power before the installation.
2.Please prepare a lever and a screwdriver before the removal and the installation.
3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.
4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2015 Peugeot 308S head unit installation instruction
1. Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside.
Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside
2. Remove screws that fixed the radio on the dashboard.
Remove screws that fixed the radio on the dashboard
3. Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio.
Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio
4. Unplug the connectors at the back of the factory radio.
Unplug the connectors at the back of the factory radio
5. Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure.
Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure
6. Put the new Seicane radio into your car, you should check whether your connections are correct, and you’d better have a tidy for the cables.
7. If everything is OK, firm screws into their original place.
If everything is OK, firm screws into their original place
8. Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio.
Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio
Wish the above installation instruction can do some help for you. If there are some problems you cannot solve independently, you can seek advice from your dealer or ask a professional for help. But before the installation, please confirm that you already have got a suitable head unit. If you find it is not compatible with your car, you’d better change another one. Here I’d like to recommend a great 2015 Peugeot 308S navigation system dvd player with gps dvd Bluetooth from Seicane to you. For more details, please click:
Upgraded to the latest Android5.1.1 operating system as well as a 1.6 GHz Cortex A9 quad-core processor, this head unit better facilitate your operation. When you press the “GPS” button, you are able to find the best route to reach your desired destinations through turn-by-turn direction and voice prompts. For a safer and happier driving, without keeping your hands off the steering wheel, you can utilize the Bluetooth module to connect your enabled phone with this unit to dial, receive or reject hands-free phone calls as well as Bluetooth music. Wish you enjoy your brand new driving experience accompanied by this head unit.