If you are going to replace your factory radio with a 2002 2003 2004 2005 2006 Chrysler Sebring Sedan radio with up-to-date capabilities at a reasonable price. Then the installation part may help you save much money. Since the installation is not very complicated, you can install it with the correct instructions on your own.
2002 2003 2004 2005 2006 Chrysler Sebring Sedan radio after installation
Actually, you will have the feeling with great satisfaction after you install a car radio by yourself. Besides, you can save a lot of money if you don’t have to ask a technician for help. However, if you still have no idea how to install a new radio with the help of the guide or have no enough confidence in doing it, it’s strongly suggested to have it installed by a professional technician. The following is the step-by-step instructions on how to install a 2002 2003 2004 2005 2006 Chrysler Sebring Sedan radio for you as the reference.
Precautions before the installation:
- Please disconnect the negative cable of the battery for your safety.
- Please prepare a lever and a screwdriver before the installation.
The below is the step-by-step instruction on how to upgrade a 2002 2003 2004 2005 2006 Chrysler Sebring Sedan radio.
- Remove the trim piece above cup holder with a lever.
2002 2003 2004 2005 2006 Chrysler Sebring Sedan radio installation step 1
- Remove 2 screws behind the trim piece.
2002 2003 2004 2005 2006 Chrysler Sebring Sedan radio installation step 2
- Gently pry around the side of trim panel with the lever and then remove the trim panel.
2002 2003 2004 2005 2006 Chrysler Sebring Sedan radio installation step 3
- Remove 4 screws which holds the factory radio in place.
2002 2003 2004 2005 2006 Chrysler Sebring Sedan radio installation step 4
- Take out the factory radio.
2002 2003 2004 2005 2006 Chrysler Sebring Sedan radio installation step 5
- Disconnect the smaller harness on the behind of the factory radio.
2002 2003 2004 2005 2006 Chrysler Sebring Sedan radioinstallation step 6
- Connect the cables of the new Seicane car stereo according to the guidance of the user manual.
- Connect the smaller harness at the back of the new radio.
- Put the new Seicane car stereo back into the dash.
- Install four screws and trim panel.
- Install 2 screws behind the trim piece and the trim piece.
- Turn on the new radio and have a comprehensive test.
To help you replace your factory radio, here’s the link of a 2002 2003 2004 2005 2006 Chrysler Sebring Sedan radio from Seicane which can perfectly fit Chrysler Sebring Sedan from 2002 to 2006, you can check which radio can work well with your car.
This 2002 2003 2004 2005 2006 Chrysler Sebring Sedan radio comes with comprehensive practical features to meet all your needs in a car stereo, such as GPS navigation system, DVD and CD player, FM/AM radio, Bluetooth technology, Ipod, wifi, USB and SD card connection, etc. You can get access to more safety and pleasure when you pair with your enabled mobile phone via bluetooth technology for hands-free calls and streaming music. And the worldwide real-time GPS navigation system can guide you to a variety of locations with east. Just install this amazing car stereo into your car and enjoy a brand new driving experience from now on.