Here is a picture of aftermarket car stereo gps dvd with nav system of 2008 2009 2010 2011 Jeep Grand Cherokee.You will know whether this stereo can be installed in your car by comparing their trim panels between this unit and original one.
aftermarket car stereo gps dvd with nav system of 2008 2009 2010 2011 Jeep Grand Cherokee
Do you have a car of Jeep Grand Cherokee for 2008-2011?If your answer is yes and you want to upgrade its sound system,then you can patiently read this article that will tell you detailed installation steps for 2008 2009 2010 2011 Jeep Grand Cherokee dvd navigation with BT Ipod TV.
A lot of people upgrade car audios is just like we are changing our cell phones very rapidly.If you have no time to do it yourself,a professional person can do this only if you pay him corresponding fees.And is it possible to do by yourself?
It’s a fact that a lot of drivers have demonstrate they can succeed installing Jeep Grand Cherokee navigation system.It doesn’t need technical skills but right removal tools,and you should be gentle when you are prying something and keep well car parts after removal.
Some tips before installation:
1.Please disconnect negative negative cable before you begin to work,this will ensure you more safer
2.Have a check for your car series include the radio to see whether everything is ok and then turn off them and park your car well
3.You’d better make enough preparation for your installation work by searching enough information about this unit,and next website may help you a lot:http://www.seicane.com/oem-gps-navigation-stereo-remove-for-2008-2009-2010-2011-jeep-grand-cherokee-with-am-fm-radio-rds-bluetooth-tv-tuner-cd-dvd-player-hd-1080p-c202
4.Preparing tools which will be used in the process
2008-2011 Jeep Grand Cherokee stereo removal and dvd navigation installation:
1.Original dashboard of 2008-2011 Jeep Grand Cherokee
Original dashboard of 2008-2011 Jeep Grand Cherokee
2.Prize the trim panel to release it with a tool
Prize the trim panel to release it with a tool
3.Remove trim panel and unplug antennas between panel and car
Remove trim panel and unplug antennas between panel and car
4.Remove 4 screws,there are 2 screws on each side
Remove 4 screws,there are 2 screws on each side
5.Gently take out factory stereo and make cables off it
Gently take out factory stereo and make cables off it
Operations for CD radio removing is over here,and next we will learn how to install new head unit into the car.
6.Please connect cables step by step as next pictures show
connect antennas,cables1
connect antennas,cables2
connect antennas,cables3
7.Then install new radio into right space,and you’d better have a tidy for the wires because the space is limited
install new radio into right space
Precautions after installation:
1.Please do not be too excited after successful installation,remember that keeping you safe can only enjoy more entertainments,so do not stare at it when you are driving
2.Please do not use any chemicals to wash it,neither other kind of cleaning products
3.When you are driving on a rainy day,you should pay more attention to the touch screen of head unit,for moisture may gather on it and cause damage to the machine
4.Please change the exhausted batteries in time in order to make your upgraded radio can be used longer
For more kinds of car stereos,you can visit next link for help:http://www.seicane.com/.