If you plan to replace your factory radio, you may worry about that it is too complicated to install a new head unit in your car. As a matter of fact, the installation is quite easy. If you have some related installation experience and a correct installation guide, you can even easily achieve the installation within a short time. The picture below is a 2004-2010 NISSAN TIIDA head unit from Seicane after installation. If you have the same dashboard, you can read the following 2004-2010 NISSAN TIIDA head unit installation guide as a reference.
2004-2010 NISSAN TIIDA head unit after installation
Precautions:
- Please apply the parking brake before the installation.
- For your safety, please disconnect the negative cable on the vehicle battery.
- Please prepare a lever and a screwdriver for the installation.
2004-2010 NISSAN TIIDA head unit installation guide
Step 1:
Use a screwdriver to remove two screws above the Nissan Frontier radio.
2004-2010 NISSAN TIIDA head unit installation step 1
Step 2: Remove the trim panel.
Please wedge a flat tip screwdriver under the trim panel and pry up on it to remove the trim panel. To protect the trim from being accidentally scratched, you can use a clean rag while prying up on the trim panel.
2004-2010 NISSAN TIIDA head unit installation step 2
Step 3: Unscrew the four screws which are holding the factory radio in place with a screwdriver. Then gently take the factory radio off the panel.
2004-2010 NISSAN TIIDA head unit installation step 3
Step 4: Disconnect the radio antenna in the back of the factory radio and unplug the electrical plugs running to the back of the radio.
2004-2010 NISSAN TIIDA head unit installation step 4
Step 5: Connect the antenna in the back of the new Seicane head unit and plug the electrical plugs running to the back of the radio. If you have any question on how to connect the antenna to new head unit, please take the user manual as a reference or turn to the dealer for a wiring diagram.
Step 6: Turn on the new Seicane head unit to have a careful check if it works well with your car. If it doesn’t, please check whether all the cables are connected correctly.
Step 7: After the test, please put the new Seicane head unit into the dash.
Step 8: Install all the screws and the trim panel into their original place.
You can find that the dashboard shown in the installation guide may be different from yours. It’s
normal that cars in different manufacture years come with different dashboard. Please rest
assured, for it won’t have much influence on the installation which is quite similar. If you think it
too hard for you to install this head unit on your own, you can have it installed by a professional.
To make sure you have a successful upgrading, you need to find a right head unit which can be installed in your car seamlessly. If you don’t know which is suitable with your car, you can refer to the following link which is about an ideal 2004-2010 NISSAN TIIDA head unit from Seicane, please click:
This 2004-2010 NISSAN TIIDA head unit comes with built-in WIFI, you can surf the internet freely in your vehicle to go through the websites and download apps and videos so long as you are in the range of a WIFI hotspot. You are allowed to make and receive phones as well as stream when you pair your mobile phone with this unit. What’s more, a large amount of popular multimedia formats are compatible with it, such as DVD/VCD/CD/MP3/MPEG4/DIVX/CD-R/WMA/JPEG, you can definitely make your driving different later on!
Therefore, it’s wise of you to replace your factory radio with this 2004-2010 NISSAN TIIDA head unit right now. Wish you have a wonderful time with it and good luck to you!
Propecia Comentarios
Componentes Viagra