Detailed installation instructions for 2009 2010 2011 Mazda 6 navigation cd radio with BT touch screen

You may would like to know detailed installation instructions for 2009 2010 2011 Mazda 6 navigation cd radio with BT touch screen if you are a owner of 2009 2010 2011 Mazda 6?

Installing new car stereos for cars nowadays is not only in order to keep up with the trend,but also has became an necessary thing for drivers who are increasing at very rapid speed,which means that driving in city become trouble thing especially at high-crowded time.

Thus many people want to buy a fashionable car DVD player for your Mazda 6,then you go to the exact market and see various kinds of stereo radios but you may feel confused because you don’t know which one to choose for your car.There is no need to be worry,here is a picture for you to take as reference:car stereo radio after installation,aftermarket dvd gps navigation with bluetooth music of 2009 2010 2011 Mazda 6,and it is right for your car and can be installed in without problems.

car stereo radio after installation,aftermarket dvd gps navigation with bluetooth music of 2009 2010 2011 Mazda 6

car stereo radio after installation,aftermarket dvd gps navigation with bluetooth music of 2009 2010 2011 Mazda 6

After we have chosen a right stereo,next I will show you exact steps of Mazda 6 navigation system installation,which will benefit you a lot including for other parts of car series.

2009 2010 2011 Mazda 6 original head unit removal:

1.Fasten and remove the cup holder panel in the center console

Fasten and remove the cup holder panel in the center console

Fasten and remove the cup holder panel in the center console

 

2.Loosen and remove the shift knob,then remove the small pocket panel

Loosen and remove the shift knob

Loosen and remove the shift knob

 

then remove the small pocket panel

then remove the small pocket panel

 

3.Loosen and remove trim panels(total 2) beside the shift knob

Loosen and remove trim panels(total 2) beside the shift knob

Loosen and remove trim panels(total 2) beside the shift knob

 

4.Unclip and remove center trim panel,if you feel hard to do it,then you operate next step first

Unclip and remove center trim panel

Unclip and remove center trim panel

 

5.Press shifter fasten trigger in and make shifter down,make sure a brake on! After this,you can remove the center trim panel

Press shifter fasten trigger in and make shifter down

Press shifter fasten trigger in and make shifter down

 

6.Take out these two Phillips screws on each side of the center consoles,then remove center consoles

Take out these two Phillips screws on each side of the center consoles

Take out these two Phillips screws on each side of the center consoles

 

7.Make left screw and right bolt out

Make left screw and right bolt out

Make left screw and right bolt out

 

8.Loosen and remove the vent panel including the hazard switch above the head unit

Loosen and remove the vent panel including the hazard switch above the head unit

Loosen and remove the vent panel including the hazard switch above the head unit

 

9.Make out these two screws with a screwdriver

Make out these two screws

Make out these two screws

 

10.Remove original stereo autoradio and unplug cables with the help of suitable tools

Remove original stereo autoradio

Remove original stereo autoradio

 

unplug cables

unplug cables

 

2009 2010 2011 Mazda 6 aftermarket nav audio system installation:

11.Fasten this bolt and make most fine connected here and fix by that bolt

Fasten this bolt

Fasten this bolt

 

make most fine connected here and fix by that bolt

make most fine connected here and fix by that bolt

 

12.Connect these plugs as the picture show

Connect these plugs as the picture show

Connect these plugs as the picture show

 

13.After cables have been connected to right positions,put new unit into the space

14.Make all set-aside car head unit equipment back to its original place and fix corresponding screws and shift knob

You can visit next website if you need to know more details about new installed head unit:http://www.seicane.com/2009-2010-2011-mazda-6-aftermarket-oem-gps-stereo-am-fm-radio-dvd-tv-tuner-bluetooth-music-backup-camera-pop-hd-lcd-monitor-ipod-iphone-dvr-aux-3g-wifi-c012.

All operations for installation has been finished.Before you really start to install Mazda 6 aftermarket gps navigation, there are some tips for you.

Precautions about installation and new unit:

1.Please ensure that you have finished car’s parking series before you begin any work

2.Do not use any strong chemicals or cleansers to clean the unit please,you can do it with a piece of clean and dry cloth

3.When you are making cables connection, make them as neatly as possible, because the space for it is very limited

4.Please don’t take the GPS SD card out when power is on

 

 

 

This entry was posted in Mazda car stereo and tagged , , . Bookmark the permalink.

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>