Do you think that it is too expensive to install your car stereo in a car stereo upgrade center? If yes, would you like to try to replace your factory radio with a brand new one all on your own? As a matter of fact, it is not impossible for you to finish the car stereo installation by yourself under the guidance of an installation guide. So if you have a FIAT OID PUNTO, you can follow the following detailed FIAT OID PUNTO dvd player car stereo installation guide as reference.
FIAT OID PUNTO dvd player car stereo after installation
Before and during installation, you should notice:
1.Before connecting, please make sure the ignition is off to avoid short circuit.
2.Ensure connect the yellow and red power cable at last.
3.Ensure that all loose wires are isolated with electrical tape
4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).
5.Ensure that all ground is connected to the same place.
6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professionals.
7.For your convenience, here are the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400
FIAT OID PUNTO car stereo installation guide
Step 1. The original car radio.
The original car radio
Step 2. Insert the release keys into the slots of the original radio.
Insert the release keys into the slots of the original radio
2-1
Step 3. Pull outwards to release the original radio.
Pull outwards to release the original radio
Step 4. Slightly remove the original radio.
Slightly remove the original radio
Step 5. Check all the accessories for the new Seicane car radio.
Step 6. Connect the harnesses to the back of the new Seicane car radio.
Step 7. Connect the Seicane car radio to your original stereo’s plugs.
Step 8. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
Step 9. Put the new Seicane car radio into the dash.
Step 10. Put everything into their original place. All the installation is done.
Above steps are all about how to remove and install a FIAT OID PUNTO dvd player car stereo. Before the installation, please confirm that you are clear about every step. If you have any problems, you can turn to your dealer for advice or a professional for help. To keep your installation make sense, you should check the compatibility between your car stereo and your car. If you don’t have ideas, you can refer to the link below, which is a Seicane FIAT OID PUNTO dvd player car stereo I would like to recommend to you. Please click:
This great FIAT OID PUNTO dvd player car stereo is specially designed to help you create a more comfortable and convenient car interior environment as well as gain a more wonderful driving experience. The most advanced 3D GPS navigation system in high precision is built in to lead you to reach your desired destinations without mistakes. Additionally, this stereo also supports various audio and video formats so as to bring you a ton of fun, such as DVD, VCD, CD, MP3, DIVX, etc. Therefore, if you like this intelligent car stereo, just add it to your cart, and wish you have a good time accompanied by it.