Can you believe that with a detailed installation guide for a car radio, you can also try to remove your factory radio and install a new aftermarket car radio? If you are a car owner of 2012 2013 2014 2015 Skoda OCTAVIA who is also looking for a correct car radio installation guide, then I would like to congratulate that you’ve found it. The following is a 2012 2013 2014 2015 Skoda OCTAVIA car radio installation guide from Seicane which can be taken as your reference. Wish it is helpful for you.
2012 2013 2014 2015 Skoda OCTAVIA car radio after installation
Before and during installation, you should notice:
1.Before connecting, please make sure the ignition is off to avoid short circuit.
2.Ensure connect the yellow and red power cable at last.
3.Ensure that all loose wires are isolated with electrical tape
4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).
5.Ensure that all ground is connected to the same place.
6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.
7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400
2012 2013 2014 2015 Skoda OCTAVIA car radio installation guide
1. Remove the trim panel with a plastic removal tool.
Remove the trim panel with a plastic removal tool
1-1
2. Remove four screws that fixed the radio on the dashboard.
Remove four screws that fixed the radio on the dashboard
3. Softly release the original radio and take it out.
Softly release the original radio and take it out
4. Unplug the connectors and cables at the back of the original radio.
Unplug the connectors and cables at the back of the original radio
5. Check all the accessories for the new Seicane car radio.
6. Connect the harnesses to the back of the new Seicane car radio.
7. Connect the Seicane car radio to your original stereo’s plugs.
8. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
9. Put the new Seicane car radio into the dash.
10. Put everything into their original place. All the installation is done.
Now do you know how to install a new car radio for a 2012 2013 2014 2015 Skoda OCTAVIA? If you meet any problems and cannot solve them individually, you can seek help from your dealer, someone experienced or a professional. And you can also directly ask a professional technician for help. To select an ideal car radio, if you have no ideas, here I would like to share an amazing 2012 2013 2014 2015 Skoda OCTAVIA car radio from Seicane with you. Here comes the link, please click:
This car radio is loaded with the most advanced and stable Android 7.1 operation system and a powerful quad-core 1.6 GHz RK PX3 CPU processor, which will greatly facilitate its operation. Thus, it can be taken into your consideration when you plan to replace your factory radio.
The worldwide real-time GPS navigation system is specially built in this unit for you to easily locate where you are and find the right way to reach anywhere you would like to go to according to turn-by-turn directions and voice prompts.
Additionally, through the Bluetooth connection between your Bluetooth-enabled mobile phone and this unit, both hands-free calls and streaming music are both available for you to gain a lot of convenience and enjoyment.
Wish you like this unit and good luck to you!