Complete Installation guide of 2013-2014 TOYOTA Vios Radio with Bluetooth Carplay support Camera

As the user of Toyota vios, what kind of your car’s radio? Have you considered upgrade it? Of course, if your radio has already been used the latest technology, there’s no reason for you to change it. But for those whose car only came with standard radio unit with few function, installing an aftermarket upgraded radio would be best option.In order to get the skills of replacement of Toyota vios unit, the following complete guide of 2013-2014 Toyota vios Radio with Bluetooth Carplay support Camera will be a reference for most of the beginners.

top

 

Before installation, you should pay attention to some important tips. First of all, you can disconnect the power and prepare some tools such as lever before the removal and the installation. Secondly, you should keep all the separate parts from the car and take great care of the dashboard to avoid scratching it during its detachment and installation.

Last but not least, you should keep handy any parts from the car and make use of all the original screws from the car as much as possible so that each related part of the unit can be fixed securely.

2013-2016 Toyota Vios car radio installation guide

Step 1. Remove the panel with your hands,please use a plastic removal tool if necessary.

图片1

 

Step 2. Disconnect the connector at the back of the air vent.

图片2

Step 3. Use a screwdriver to remove four screws that are holding the original car radio.

图片3

Step 4. Gently take out the original car radio from the dashboard.

Step 5. Unplug the connectors and cables at the back of the original car radio.

图片5

Step 6. Check all the accessories for the new car radio.

Step 7. Connect the harnesses to the back of the new Seicane car radio.

Step 8. Connect the car radio to your original car radio’s plugs.

Step 9. Put the new car radio into the dash.

Step 10. Turn on the new car radio and have a comprehensive check if it works well.

Step 11. Install 4 screws back to their original position.

Step 12. Install the trim panel back to its original place.

Once you finished these steps, you should get the basic knowledge about how to install your Toyota vios radio but there are still a tip that you should keep in mind, which is that you should check all of the functions of it and to see whether it can perform well. But if you find it is too difficult for you to finish it, you can ask a car dealer for help or search the answers from the website such as Seicane, which has made car audios for over many years and have won good reputation abroad. And this is a product link of Toyota vios Andriod head unit, where you can find some information that you may need.

There are different style radio systems on Seicane, welcome to visit it. You can also contact it for more information. There are always available assistance here whenever you need.

end

 

 

 

 

This entry was posted in Toyota car stereo and tagged , , . Bookmark the permalink.

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>